X98_PRO_android_5.1_mirek190_v6.0 rom

[Josh]

Hi,

After doing a clean install of v.3 some of my most used apps ( showbox,..)  are crashing everytime I open them.

Thanks for the great work.

 

[Asif Mostafa Anik]

Can’t flash using flash tool. Hi Mirek nice work you have done. But I could not flash my tab. I install software’s as per serial you mentioned. Then got into DNX mod. In PC I ran flash tool chose the option. The cmd window blinks nothing happens. What should I do?

 

[Gammlerlord]

INSTALLATION :

– install drivers from archive called – X98_PRO_drivers_and_Intel_Flash_Tool(-if_you_need_them).7z and then
– iSocUSB-Driver-Setup-1.2.0.exe
– IntelAndroidDrvSetup1.5.0.exe
– PhoneFlashTool_5.3.2.0_win32.exe –> If you want use MFT for flashing ( optional )
– run the tablet in DnX mode – switch on the tablet pressing [ power, vol+, vol-] at the same time until you will see DnX label
– plug the USB cable to PC and the tablet and run — > FLASHER_v1.1-(-just_press_twice-).bat
– later FLASHER app guide you what next –> very easy steps

Did you install the drivers as well?  The problem is your PC can’t recognize your tablet. Plesse, try to enable USB debugging at the Developer Settings/Options and reboot your device in DnX mode.

greets 

Gammlerlord

[Honza Martinásek]

Little advice… After an hour of f*** with drivers and so on (because my PC cant recognize tablet in DNX mode, only in Android) i found out you have to turn USB Debugging OFF! 

[J.B.]

Hello,

When I tried to install Mirek’s custom rom on my tablet, I used my ‘big’ computer which is 64 bit, and I didn’t got it to work.

Finaly I used my old Asus 32 bit netbook, and everything went flawless.. perhaps this is a help to someone.

[Asif Mostafa Anik]

Tried. But still <waiting for device> and blinking _. Nothing happens.

 

[Ruoska]

Asif Mostafa Anik wrote:

Tried. But still <waiting for device> and blinking _. Nothing happens.

 

Make sure your OS image ID is android. You can select it from bios or just shutdown tablet from android and then boot to dnx fastboot.

 

[Asif Mostafa Anik]

Doing that all along. But no happy flashing. 🙁

 

[AntonioDB]

I’ve a dual boot (Android + Windows) device.

Can I install Mirek Android ROM without erasing the Windows partition?

If not, how to install Mirek ROM and Windows ?

[Gammlerlord]

Hi Antonio, if you are install Mireks ROM V3 your WIN10 will be untouched

[FC]

Hi,

I wonder to know if drivers provided inside the rom of mirek works on a W10 PC.

In other words, can a W10 PC be used to flash the rom?

Thx,

Fabrizio

 

[Andrew Miller]

FC wrote:

Hi, I wonder to know if drivers provided inside the rom of mirek works on a W10 PC. In other words, can a W10 PC be used to flash the rom? Thx, Fabrizio

 

I used a windows 10 laptop and the drivers worked fine. No problems.

[Andrew Miller]

Gammlerlord wrote:

Hi Andrew, is your Screen just frozen or did you have a black screen? I had Black Screen after 10 minutes Asphalt 8. Maybe you should disable IGD Turbomode at BIOS. It made my system More stable (specialy WIN10). Did you make a dirty Upgrade to Mirek ROM V3 or did you cleard everything.

Changed the BIOS settings and did a clean install and still no joy. I managed to disable the animations in Carcassone and it appears to be working without animations. Interestingly I tried Asphalt 8 with full graphics options enabled and had no problems. Must just be some specific software issues.

Thanks Karl and Gammlerlord for the advice

[AntonioDB]

Gammlerlord wrote:

Hi Antonio, if you are install Mireks ROM V3 your WIN10 will be untouched

OK, thanks a lot!

[Peter Ong]

First, your Windows must be able to connect (recognize) your Tablet flawlessly. Open Device Manager, check and see do you have any ‘Unknown device’ or Device with exclamation mark under USB Contollers. You should see something like ‘Intel USB Composite’. Depends on OS settings & Driver installed, my notebook also shows “Portable Devices” and “Android ADB Devices”. They used to be all OK. If any of them in ‘!’ mark, you likely will ‘waiting for devices’ as it can’t see your devices from Windows.
Try do whatever you can do get rid your driver issues. Some people solved by rebooting their Tablet from Android, some reboot PC, some change USB cables … etc. (you already got 3 working advices 😀 )

Attachments:

You must be logged in to view attached files.

[Author]

Posts