X98_PRO_android_5.1_mirek190_v6.0 rom

[Ling Cheng Xian]

Karl0ss wrote:

Ling Cheng Xian wrote:

mirek wrote:

mooms wrote:

Karl Hudgell wrote:

Bit of a performance improvement over the last build, antutu score of 76458 on 2.01 and 77731 on 3.0

It’s the opposite on mine: 81637 on v1 (about the same on v2, didn’t take screenshot), 76538 on v3 (tested after fresh boot). I dirty flashed V3 on v2.01, maybe it’s because of that ?

On v1 was such score because cpu was works on full speed almost all the time ( heat problem ) – 60 % or more Now on v3 cpu on full speed is only 1 -10 % and trying keep low frequencies. Rom is made to run as fast as possible and save battery – no to get as much as possible in benchmarks … If you want as high score as possible use performance scheduler …

may i know what is performance scheduler?

If you use something like Trickster Mod Kernel or Kernel Auditor you can change the min / max of the processor and change the governor its using..

 

wow, thank you

have just tried it, with different setting it able to increase 2000-3000 in antutu (my v3 only get 74000+, but with this, it can reach 77000+) and it do make the game perform smoother (Fifa 16, smoother but still quite lag, better)

it show 3 option on the scheduler, but i found that is more than 6 type on some website, is it possible we add on the option?

and is that any app or software that allow to adjust the screen resolution? (want to try lower the resolution, hope can help the performance in FIFA 16)

[Josh]

Hi,

After doing a clean install of v.3 some of my most used apps ( showbox,..)  are crashing everytime I open them.

Thanks for the great work.

 

[Asif Mostafa Anik]

Can’t flash using flash tool. Hi Mirek nice work you have done. But I could not flash my tab. I install software’s as per serial you mentioned. Then got into DNX mod. In PC I ran flash tool chose the option. The cmd window blinks nothing happens. What should I do?

 

[Gammlerlord]

INSTALLATION :

– install drivers from archive called – X98_PRO_drivers_and_Intel_Flash_Tool(-if_you_need_them).7z and then
– iSocUSB-Driver-Setup-1.2.0.exe
– IntelAndroidDrvSetup1.5.0.exe
– PhoneFlashTool_5.3.2.0_win32.exe –> If you want use MFT for flashing ( optional )
– run the tablet in DnX mode – switch on the tablet pressing [ power, vol+, vol-] at the same time until you will see DnX label
– plug the USB cable to PC and the tablet and run — > FLASHER_v1.1-(-just_press_twice-).bat
– later FLASHER app guide you what next –> very easy steps

Did you install the drivers as well?  The problem is your PC can’t recognize your tablet. Plesse, try to enable USB debugging at the Developer Settings/Options and reboot your device in DnX mode.

greets 

Gammlerlord

[Honza Martinásek]

Little advice… After an hour of f*** with drivers and so on (because my PC cant recognize tablet in DNX mode, only in Android) i found out you have to turn USB Debugging OFF! 

[J.B.]

Hello,

When I tried to install Mirek’s custom rom on my tablet, I used my ‘big’ computer which is 64 bit, and I didn’t got it to work.

Finaly I used my old Asus 32 bit netbook, and everything went flawless.. perhaps this is a help to someone.

[Asif Mostafa Anik]

Tried. But still <waiting for device> and blinking _. Nothing happens.

 

[Ruoska]

Asif Mostafa Anik wrote:

Tried. But still <waiting for device> and blinking _. Nothing happens.

 

Make sure your OS image ID is android. You can select it from bios or just shutdown tablet from android and then boot to dnx fastboot.

 

[Asif Mostafa Anik]

Doing that all along. But no happy flashing. 🙁

 

[AntonioDB]

I’ve a dual boot (Android + Windows) device.

Can I install Mirek Android ROM without erasing the Windows partition?

If not, how to install Mirek ROM and Windows ?

[Gammlerlord]

Hi Antonio, if you are install Mireks ROM V3 your WIN10 will be untouched

[FC]

Hi,

I wonder to know if drivers provided inside the rom of mirek works on a W10 PC.

In other words, can a W10 PC be used to flash the rom?

Thx,

Fabrizio

 

[Andrew Miller]

FC wrote:

Hi, I wonder to know if drivers provided inside the rom of mirek works on a W10 PC. In other words, can a W10 PC be used to flash the rom? Thx, Fabrizio

 

I used a windows 10 laptop and the drivers worked fine. No problems.

[Andrew Miller]

Gammlerlord wrote:

Hi Andrew, is your Screen just frozen or did you have a black screen? I had Black Screen after 10 minutes Asphalt 8. Maybe you should disable IGD Turbomode at BIOS. It made my system More stable (specialy WIN10). Did you make a dirty Upgrade to Mirek ROM V3 or did you cleard everything.

Changed the BIOS settings and did a clean install and still no joy. I managed to disable the animations in Carcassone and it appears to be working without animations. Interestingly I tried Asphalt 8 with full graphics options enabled and had no problems. Must just be some specific software issues.

Thanks Karl and Gammlerlord for the advice

[AntonioDB]

Gammlerlord wrote:

Hi Antonio, if you are install Mireks ROM V3 your WIN10 will be untouched

OK, thanks a lot!

[Author]

Posts