X98_PRO_android_5.1_mirek190_v6.0 rom

[dan grab]

Probably you have to reinstall Mirek Rom again, since android partition could be corrupted, remember to make a usb pendrive with winpe because you should probably got to install windows 10 again. good luck and Read how to reinstall before doing anything

Probablemente tenga que reinstalar Mirek Rom de nuevo, yaque la partición de Android esté corrompida, recuerde hacer un pendrive con el Windows 10 puesto que a continuación tendrá que reinstalar Windows 10 de nuevo. Buena Suerte y lea antes de hacer nada

[David Rafael]

hi, I tried to install (Intel_ADB_drivers).exee but win 10 dont permit, do you know what I do?

thanks a lot for the answer.

[pepe]

dan grab wrote:

Probably you have to reinstall Mirek Rom again, since android partition could be corrupted, remember to make a usb pendrive with winpe because you should probably got to install windows 10 again. good luck and Read how to reinstall before doing anything Probablemente tenga que reinstalar Mirek Rom de nuevo, yaque la partición de Android esté corrompida, recuerde hacer un pendrive con el Windows 10 puesto que a continuación tendrá que reinstalar Windows 10 de nuevo. Buena Suerte y lea antes de hacer nada

 

Good
I do not understand the part of W10.
I return to perform the operation, when in the menu Mirek pulse 2 part not to touch the windows, or do something else?

[dan grab]

You’d better start here and follow the tutorial, https://www.youtube.com/watch?v=I-2YHXjJajs

Empiece desde cero https://www.youtube.com/watch?v=I-2YHXjJajs

[pepe]

dan grab wrote:

You’d better start here and follow the tutorial, https://www.youtube.com/watch?v=I-2YHXjJajs Empiece desde cero https://www.youtube.com/watch?v=I-2YHXjJajs

 

Hello
I was doing well, but there is one thing that gives me error, install the Intel driver, I have W10, a way to install them?

[pepe]

Hello
I’ve already got w10 drivers, I have again done everything again and still remain in the logo of teclast. Any ideas?

[Tomi]

Hi

I bought my Teclast x98 pro in March 2016. How can I check the version of the actual SW? Could you propose me a tutorial in English how to update?
Thanks in advance

[Iñigo Martinez Lasala]

You have to disable Windows 10 driver signature check. Boot windows in recovery mode. There are thousands of pages where this is explained with screenshots. Use Google.

Has de deshabilitar el chequeo de drivers firmados de Windows 10. Arrancando en modo recuperación se puede hacer. Hay muchas webs donde lo explican. Usa Google para buscar un tutorial o vídeo, es muy sencillo.

[Iñigo Martinez Lasala]

Anonymous wrote:

Iñigo Martinez Lasala wrote:

I finally managed to extract both v3 and v6 boot.img partition (kernel plus boot environment). Basically, they are equal. Almost no modifications between both. However, in v6, mirek removed 2048MB limit that Teclast had imposed without explanation. Only that. So, the problem with locks could be imposed by removing this limit in kernel. I’ve played with 3400M but kernel only accepts 2048 limit. Anyway, I’m testing with some different options in order to see if I can avoid that problem. Keep you informed. By the way, it would be great if I could replace old 3.X series kernel from Teclast with a new 4.XX series, but unfortunately my Android knowledge is not so large and eventually I would need plenty free time. <noscript></noscript>So, don’t wait anything here. <noscript></noscript>

Interesting finding indeed! Maybe v6 could be utilized if it was repacked with memory limit? I think there is also an issue with power save. I’ve been suffering from poor WiFi strength pretty much all the time (temporary fix is to switch off and on WiFi – this lasts for a while) and but when I connected PSU to the tablet WiFi remained better. Didn’t have time to check this thoroughly unfortunately. Are there some tools to disable power save functionalities from certain functions? IIRC, Mirek has been focusing on power save quite a bit – maybe this can be a reason for poor WiFi as well.

Kernel from v3 and v6 the same. Only 4G memory limit changes.

Between system v3 and v6 are more differences, specially some build.prop parameters and disabling two cores under low load. But most of the ROM is basically the same.

I’ve been playing with v6 system and v3 kernel without memory limit and problem remains. Now I’m testing with v6 system but removing some tweaks in order to locate problem source. I hope it’s core disabling or surfaceflinger restart scripts (or a combination of both) because if not it will be probably memory limit removal and that’s bad. There is a huge difference in terms of performance.

[Jean Marc]

Something very strange happens, over Android the battery charge with 2.5mah 5v, when the tablet is shut down also, but over windows noway to charge, not with 1.5mah, not with 2.5mah and not with 3.5mah AC. I’d check the drivers, reinstalled them but nothing. Any suggestion?

Ps. Where is Mirek?? the Rom is amazing except that I am a bit fed up about crashes without reason with Android OS, when will come a fix?

[telquetel]

Hi everyone, I’m new to this forum but I had this tablet for more than a year now. I have also being plagued with sudden crashes or FC’s from the very beginning with Mirek’s roms.

As soon as I got the tablet, I installed Mirek’s rom so to solve my problem I decided to take the tab back to the state it was in when I received it.

I clean installed Teclast X98 Pro V1.03 Android 5.1 Rom Stock. No problem, it booted correctly but Play Store kept sending me continuous errors. I then clean installed X98 PRO android 5.1 mirek190 v3.0.

It’s been  3 days now since I made the move and, if the tab is less performant I don’t notice it. Morever, I did not have any fc or crashes since and the battery is great.

Just wanted to share….

 

[jose javier villalta limones]

<pre id=”tw-target-text” class=”tw-data-text vk_txt tw-ta tw-text-small” dir=”ltr” data-placeholder=”Traducción” data-fulltext=””><span lang=”en”>Hello
my tablet is heated .
It has mirek190 v6
I have done the mod
and no longer improve .
I am disappointed in this brand of tablet.
the reintalado the mirek190 v6
and still the same ..
buy two in April this year 2016
…….
I want them back</span>

Attachments:

You must be logged in to view attached files.

[jose javier villalta limones]

Hello…. my tablet is heated . It has mirek190 v6 …. I have done the mod … and how to improve it no longer ….. I am disappointed in this brand of tablet …… I have reintalado the mirek190 v6 and still the same .. buy two tablets teclast x98 pro in April this year 2016 ……. I want them back

Attachments:

You must be logged in to view attached files.

[Jose J Villalta]

Hello…. my tablet is heated . It has mirek190 v6 …. I have done the mod … and how to improve it no longer ….. I am disappointed in this brand of tablet …… I have reintalado the mirek190 v6 and still the same .. buy two tablets teclast x98 pro in April this year 2016 ……. I want them back

Attachments:

You must be logged in to view attached files.

[Jean Marc]

Well, just flash back the v3, you’ll may have only 2gb ram but at least it will be stable. If you don’t have the file just downgrade until v4 maybe it will help. Clean install of course.

Cheers.

[Author]

Posts