[Martin]

Hello everyone, and thanks for this wonderfull guide Rinaldo!

Everything works fine except that the accelerometer is not detected anymore in android (so the auto-rotation does’nt work anymore).

In windows, no problem, the screen turns, so this is not an hardware issue, anyone has an idea please?

Thanks a lot for helping!

[Martin]

Lukas wrote:

if there is a problem with the configuration of your touchscreen then please try using this file: http://techtablets.com/forum/topic/teclast-x2pro-stylus-not-working-after-re-install/#post-33766 and rename it accordingly. The file in the above posts does not contain any configuration data for the controller.

Lukas.. you’re a damn God!

It works 😀

Thanks a lot both of you! I suggest to replace the file in the techtablet’s library for other people like me 🙂

[Martin]

I can try yes, is the a special distribution for the tablet or can I use a usb version with no installation to try it? Sorry for all the questions and thanks again for your help!

 

[Martin]

Daniel wrote:

Follow these steps and everything will work fine. Download microsoft media creation tool and download a windows 10 image. Insert a usb drive and follow these steps to format the usb drive: Connect USB drive to a Windows PC. Open a command prompt with Admin rights and run the commands below Enter the following command in the CMD window: diskpart With this command you can display the list of drives. list disk Now, identify your USB stick and enter the following command as a number (instead of “#”): select disk # You can delete all existing partitions from the USB stick with this command: clean With this chain of command, a new partition is created, then selected, activated and then formatted to FAT32. A drive is subsequently assigned when the procedure is completed: create partition primary select partition 1 active format quick fs=fat32 assign Now you can exit Diskpart: exit Mount the Windows 10 ISO and then copy all the files on the CD Image to the USB drive. Insert the usb drive to the tablet format your ssd and reinstall windows download the drivers using this link: http://techtablets.com/downloads-drivers-roms/ restore all the drivers using DoubleDriver which is included in the download Restart the tablet and restore the TouchSetting.gt Restart again and everything works

Still not working :'(

The goodix touch HID is well installed and working Windows says, but the touch screen is not working.

I ‘ve used the doubledriver dump zip (the win10 driver one can’t be use with double driver there’s no restore.ini), should I manually install some of the win10 zip drivers?

I’ve just found womething maybe Strange in the tablet pc settings: Windows says the screen is “touch limited” (I join a picture but in french sorry), don’t know if it’s normal :/

 

Attachments:

You must be logged in to view attached files.

[Martin]

To restore the touchsetting.gt I just have to replace the existant one or doing something else?

I used the image from teclast pan baidu server, I thought or format the drive before installing am I wrong? I have to use double driver too?

In the system screen, windows indicate a touch screen 5 pinch and pen capabilities so I don’t understand 🙁

[Martin]

<hr />

otage doesn’t work means that doesn’t work sorry (french keyboard)

[Martin]

Daniel wrote:

you have to restore TouchSetting.gt to C:/Windows/inf which you find here: http://techtablets.com/downloads-drivers-roms/

I have already tried (and replacing the existant one in the inf folder) but otage doesn’t work.

Do I have something else to do?

Thanks

[Martin]

Hi everyone! I hope someone can help me :/

I reset my X2 (which I use since january without problem) with an original windows 10 image and after that (and touch screen driver re-installing), the touch screen is installed but doesn’t work :/

I flashed back the 2.1 version of the teclast firmaware, but same. Same with the V1 too.

Do you have an idea?

Thanks for helping!

[Author]

Posts