[catan]

Dear Mario,

there is a way to create a script and launch directly at the boot of a linux system like openelec?

[catan]

ken wrote:

Anyone here did try increase TDP limit for J4125?

just do as every of us did, lauch the script or RW and try to see if you gain something avoiding thermal throtling.  I thisk that this script work great for n series, with tdp lock at 6W…moving to 10W you really gain a lot with few degree more on the soc. I try to move my n-series from 6 to 15W and i see some problem, maybe due the “poor” heatspreader of my hardware. J series run directly to 10W, so maybe you have to try with 15W. Do some test (like unigine valley, run at default, check temperature and see the final score, run again at 15W and see how much rise the temperature and how much rise the score)

[catan]

dear all ,

there is a way to launch the scrip directly at the start of windows? I put my hand on a acute angle pc (n3450) with bios lock and i do some test, moving from 6W tdp to 10W i got in a suit of test an increase of performances between 73% and 110% just with an increase of power consuption of 66%, and temperature increase only by 5°, i do stress test with 6W and max temp is 55°, at 10W temperature rise up 61)

i try to move to 15W, in the same bech i have an increase between about 95% with a peak of 144% with a power increase of 150%. And sometime i see the cpu throtling, newer happen with 10W.

Temperature during stress test rise up to 66°. Unfunatly stock cooler is in aluminum, in order to increase thermal exchange i add a small 1 mm foil of copper between  cpu core and cooler and change thermal paste with better one. (of course i add a layer of thermal paste between core and copper foil an between copper foil and cooler).

So i think that 10W is the sweet point to gain a huge boost of performances avoiding huge temperare.

So it is just “boring” to launch the script or RW everything every time, there is a way to change register once for all or launch the script automatically during the startup ?

 

tnx

[Author]

Posts