[craig]

Standard windows install from link posted.  drivers from https://techtablets.com/downloads-drivers-roms/

I have H6C4 version of the tablet.

[craig]

I think the only thing you can do about size is dump android, trying to make it dual boot was stupid move from teclast.

I just used https://www.microsoft.com/en-gb/software-download/windows10 to remove all partitions and install windows(home version) then installed drivers from this site, used windows update, and then updated a couple drivers individually via device manager.  Finally I changed the touchsettings.gt file to the one here https://techtablets.com/forum/topic/touch-screen-reversed/

I now have windows running perfectly with enough space for updates and I use my sd card for all memory needs.

 

[craig]

Just go to device manager and update drivers, worked for me.

[craig]

I’m no expert but I use the Del key to get into bios, Esc works too but you could try the Del.

If you put the windows installer on USB using the tool here https://www.microsoft.com/en-gb/software-download/windows10 it might autoload.

[craig]

I found the file I needed 🙂  This worked for me on an x80 plus ID H6C4 with a full disk format and fresh install of windows from the mediacreationtool (which installed windows home, no key needed).

After the install you’ll need to also install the drivers which are found in the downloads section on this site.  If the touchsettings.gt file from that download doesn’t work then try this one, it worked for me 🙂

[Setting]
;UpdateCFG=0
SendCFG=1  ;Send CFG to touch IC when loading driver
SleepDisable=0
PhysicalXsize=1733 ;Physical size£¬the unit is 0.1mm
PhysicalYsize=1087

[Support]
ESD=1  ;Driver supports ESD recovery processing
;SensorID=5 ;According to the different SensorID send different configuration
GtpTool=0 ;GuitarTestPlateform tool support
X2X=0
Y2Y=0
X2Y=0
Log=0
Flashless=0
ICType=GT911
PrtScreen=0
CtrlAltDel=0
HomeKeyTouchTime=3
VolumeKeyEnable=1
resetRevert=0   ;reset level revert

[Feature]
Pen=0  ;stylus/pen support
NumberOfKey= ;The total number of keys supported,equal to 0 does not support key
Key1= ;0xe3 is home key,Must be a hexadecimal number
Key2=
Key3=
Key4=

[CFG]
DefaultCFG=0x00,0x20,0x03,0x00,0x05,0x05,0x35,0x00,0x01,0x08,0x28,0x0F,0x50,0x32,0x03,0x05,0x00,0x00,0x00,0x00,0x11,0x00,0x08,0x18,0x1A,0x1E,0x14,0x8C,0x2E,0x0E,0x1B,0x1D,0xA6,0x0F,0x00,0x00,0x00,0x82,0x03,0x1D,0x1E,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x14,0x3C,0x94,0xC5,0x02,0x07,0x00,0x00,0x04,0x8A,0x16,0x00,0x80,0x1B,0x00,0x76,0x22,0x00,0x6C,0x2B,0x00,0x62,0x36,0x00,0x62,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1A,0x18,0x16,0x14,0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2A,0x29,0x28,0x26,0x24,0x22,0x21,0x20,0x1F,0x1E,0x1D,0x1C,0x18,0x16,0x14,0x13,0x12,0x10,0x0F,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA7,0x01
senserid_0=
senserid_1=
senserid_2=
senserid_3=
senserid_4=
senserid_5=

 

[Author]

Posts