[Guenter G]

I did not have to re-install the drivers. the update took it from the previous installation.

But in case you full refresh and wipe the drivers  I’d copy the drivers to the same SD card and install it directly from there, right after the OS was updated

[Guenter G]

Hi dvdfreak

thanks a lot. it worked with Rufus.

If others want to upgrade please be aware that you have to use Rufus with an SD Card, then put the SD-Card into the tablet, then start the setup from the SD-Card. and put in a power cable into the USB slot as the update takes quite a while (more than 3 hours) and you run out of battery otherwise before it’s finished.

Using the USB OTG adapter and an USB stick (created with Rufus) will correctly start the update but will never finish as you run out of battery during the update process and then Win10 switches back to the old version and is not updating correctly

best regards

Günter

[Guenter G]

HI dvdfreak,

 

I tried this already with Media Creation Tool and install fresh from USB. But same error message : hard disk too small, 20GB needed, only 19.85GB avalaible

it’s a partitioning problem of the hard disk 🙁 will probably need to repartitition to get a 20GB c:/partition instead of only 19.85GB

[Author]

Posts