[Pawel]

Could someone make a ‘how to’ movie for beginners. I have no experience and I would not want to kill my laptop.

[Pawel]

If I have the v5 version and would like to unlock the bios, do I have to take all the steps from the beginning?
Will I download v5 unlocked from first post and start from point 2.5?
maybe someone could record the movie ‘how to’ 🙂
I am sorry I am weak in this type of matters

[Pawel]

I’m interested! 🙂

[Pawel]

John Smith wrote:

What type of ssd do you have? Make clean install to emmc, then change Intel AHCI driver to Fernando’s patched. Clone AFTER to SSD. Boot will be OK, but lower R/W speed, not the specific maximum (or maybe not, if you are lucky, you can check it with crystal disk) Or change the SSD to 100% working one (see topics for types)

Original KingDian N480 – 120GB 120GB NGFF M.2 SSD – 120GB BLUE
Which one works 100% with our Jumper?

[Pawel]

Kenneth wrote:

This is the way I did it. Kept it as simple as possible. During installation of Windows choose custom option, delete all partitions from eMMC and SSD. Leave both unallocated and select SSD as the location for install windows. EFI and recovery partitions will automatically be installed on your SSD. The system should detect the boot manager and boot from your SSD. Thereafter, it’ll always boot from your SSD. After setup of Windows, you can then proceed to partition the unallocated space on the eMMC using disk management and install whatever necessary drivers/windows updates. Hope this helps. Let us know how it goes. Cheers

Thanks for reply.
I tried like U say but after install on SSD, windows doesn’t start. Only black screen with yellow subtitle

[Pawel]

Ok, I managed to put the system back on the emmc drive. I copied windows to the SSD drive.

How do you set the system to start from an SSD?

I tried to set  in the BIOS but with no effects, it always starts with EMMC.
I also tried “So go to Control Panel, System and Security, System, Advanced System Settings, Startup and Recovery, and then change the Default Operating System to the “other” Windows 10.” – not working.

[Pawel]

Thanks for reply. How can I check tka battery is fully charged?

Its looks like cant charge battery because I left my laptop for a few hours under the charger. I turned it on and after a few seconds it turned off and now it does not turn on for a second.

[Author]

Posts