I have successfully removed Windows 10 with following steps:
- set intel rules in /etc/udev/rules.d/51-android.rules (Linux PC ) or install USB drivers (Windows PC – not tested)
# Intel vendor ID for ADB
SUBSYSTEM==”usb”, ATTRS{idVendor}==”8087″, MODE=”0666″
#intel vendor ID for SOC device
SUBSYSTEM==”usb”, ATTRS{idVendor}==”8086″, MODE=”0666″
(note perhaps only 8087 is needed)
- install adb (Android SDK) or sudo apt-get install android-tools-adb android-tools-fastboot (Linux Ubuntu – have not tried)
- download Intel® Platform Flash Tool Lite for Linux (or Windows) https://software.intel.com/en-us/installing-firmware-with-flash-tool-linux
- boot to Android, enable Developer settings (clicking ‘Settings -> About tablet -> Build number’ several times) and USB Debugging (‘Settings -> Developer options -> USB debugging’)
- connect USB to tablet, let USB debugging to activate
- Go to bootloader – issue on your PC from command line ‘adb reboot bootloader’
- Start Intel® Platform Flash Tool Lite (on Linux PC start with command ‘platformflashtool’ or launcher Icon, on Windows start with launcher Icon)
- select ‘flash.json’ from Android only firmware (do not forget to change the gpt.bin before), configuration ‘blank’ (is automatically selected, no need to change)
- flash, after flash it will reboot, wait till Android starts (there is only Android to select during boot)
- switch language (to English) if needed
- free storage is 25 GB now (thanks to omid)
After that I have installed TWRP (http://www.modaco.com/forums/topic/377298-recovery-twrp-302-0-for-cube-iwork8-ultimate-iwork8-air/) and dm-verify and root (http://www.modaco.com/forums/topic/377299-howto-disable-dm-verity-root-navigation-bar-mod-for-cube-iwork8-ultimate-iwork8-air/) by KonstaT (thanks)
