[Ferenc Kasa]

I have the same blackskreen freeze (with colorful lines) sometimes as audi, but with the original teclast rom. So its probably not the v6’s fault.

[Ferenc Kasa]

Yes, but it dissapeared too fast beacause of the error message,  thats why I went to the internet caffe and used a real keyboard. So if you can enter the bios somehow and turn off the fast boot, that f**ng message not gonna ruin your life anymore.

[Ferenc Kasa]

Uab means usb of course 🙂

[Ferenc Kasa]

Just the original one… I don’t have a uab keyboard so i needed to go to a internet cafe :/ and used a totally standard one…

Anyway a small trick if you dont have uab keyboard. If you keep tapping the screen when the teclast logo is on, a small keyboard appers at the bottom. You can enter thw bios via that one… If you dont get an error message, like i had “oem1 acpi table parse error” it come up so fast i didnt have time tapping the screen…

<hr />

[Ferenc Kasa]

I had the same problem.  Try to turn off the fast boot option in the bios, it solved to me!

[Ferenc Kasa]

I tried to install the rom, followed all the steps, installed the drivers, boot the tablet in dnx mode, and than nothing happens. Tha flash tool just “waiting for device”.

I used a windows 10 laptop… Could it be the problem? Have you got any suggestions? Is there any more driver to install?

[Ferenc Kasa]

Hi Mirek,

As I see, you are really doing an amazing job with this rom, so I’ll try it soon.

Forgive me, but I have some simple questions, probably everibody knows the answers, but Im just an ordinary user.

1 The windows is useless for me on this tablet, can I install your rom only, and use all the ~64gig with android?

2 Is  your rom working with SD cards (currently I can use my sd under windows only)

3 If I change my mind, can I set back a dual boot system?

[Author]

Posts