[Ivan]

is there a guide on the forum on how to write the firmware by welding the wires?

thanks

 

🙂

[Ivan]

Giovanni my notebook not break i have access to machine, i can boot with external dvd or usb boot.

For my old normal atx mainboard i use low level dos program to write.

do you mean that after to flash it does not start and returns black screen?

 

regards

 

[Ivan]

Giovanni wrote:

KoLSMS wrote:

Giovanni wrote:

KoLSMS wrote:

Okay, have done it, nothing is changing! Only black screen and blue Power LED comes up …

Need to flash the bios manually to the flash chip

And how can i do that? Is it very difficult?

You need to solder some wires to the board and use an external programmer

Really not possible to write low level in a dos mode?

need to sold wire on mainboard?

[Ivan]

Hi Guys

i have this bios, can I use this version already unlocked?

https://photos.google.com/photo/AF1QipOfKi-C_pJcfz88dXce7jMbAeSKxX9vFGO_uk1U?hl=it

Date 12/05/2017 19:25:21 Ver 3BANS010 Jumper10x.P8.WP3132.NHNAUHL01

My bios version is 2.18.1263

thanks

 

 

[Author]

Posts