[Andreas]

Hi,

thanks for these helpful info, works perfectly with my Teclast F5 / N4100.

But I have to do it manually in RWEverything every time because this command does not work :

Rw.exe /Min /Nologo /Stdout /Command=”W16 0xFED170A8 0000″ (Invalid Parameter)

Any idea ?

Attachments:

You must be logged in to view attached files.

[Andreas]

Ok, i figured it out now. Runs at 10w straight and I am happy. Thermals are ok, about 85 C with mod to the back of the case.

[Andreas]

Yes, but you can set it to what you want. If you remove all limits it starts running like hell, but only for a couple of seconds, then limits to 6w. The bios is fully unlocked and i did set all temperature limits much higher for testing. The throttling appears always after some seconds and stays. See new pics with higher limit attached.

Any ideas?

Attachments:

You must be logged in to view attached files.

[Andreas]

Hey Guys,

i could need some help. I got a Teclast F5 and did a thermal mod. You can change the Power Limit on this device in the Bios and it is says it is unlocked (see pics HWinfo). Somehow the device starts throttling very soon and limits to 6w (power limit exceeded) and there is no temp problem. Any Ideas on this ?

Any help will be welcome and I tried the mod in this thread too but without any change in the behavior.

Thank you  🙂

Attachments:

You must be logged in to view attached files.

[Author]

Posts