Hi everyone, I find my ezpa6 tablet jumper with a black screen because I have carelessly changed the default parameter to video. I kindly ask if any owner of a similar tablet can tell me the keystroke sequence to press during boot (from the ESC key onwards) or a screenshot of the bios screen. Thank you
The following procedure is for the ezpad 6 pro, but I guess it’s quiet simmilar on the ezpad 6? After power on hammer Delete. You will be in the Main tab after that. 2x right arrow will bring you to the Chipset tab, 2x down arrow will select “Uncore Configuration”. 1x Enter will get you there. 3x down will get you to the “vbt select” setting where the options after 1x Enter are:
- eDP (the one which works)
- MIPI Auo
- MIPI Sharp
- MIPI JDI
- eDP Type C
One option further down is the Integrated Graphics device enable setting where the options are
Next one is Primary display
- IGD (working one)
- PCIe
- HG
Screenshot attached, so tell me if you need something else, or a different tap/screen. Sorry for the reflectice images, but I took them in the train under the worst possible lighting conditions. If you don’t know what your current settings are you could try f1-f4 which should change to the fN’th option.
<pre id=”tw-target-text” class=”tw-data-text tw-ta tw-text-small” dir=”ltr” data-placeholder=”Traduzione” data-fulltext=””><span lang=”en” tabindex=”0″>Thanks for the interesting but ezpad 6 is completely different from my ezpad6.
I hope some ezpad6 owners can help me</span>
