bios 3.02 (a5c8) – online now

[Gal]

I was stupid to try this..

I was curious and thought, why not.  Tried to update and it offered me 3.01 by Teclast.  So I agreed and restarted.
The update went fine but now my SD card stopped working.  Dammit..

[CpA]

And what happend if you try to update again?

I’ll try to do it this afternoon. Nothing to lose…

[Gal]

CpA wrote:

And what happend if you try to update again? I’ll try to do it this afternoon. Nothing to lose…

Nothing.. it tells me I have the latest version (3.01).

[CpA]

Gal wrote:

CpA wrote:

And what happend if you try to update again? I’ll try to do it this afternoon. Nothing to lose…

Nothing.. it tells me I have the latest version (3.01).

I’ve just do it. On Windows is 3.01, but if you go to the BIOS,  you can see it’s  the 3.02.

[Christoforos Cosma]

Gal wrote:

I was stupid to try this.. I was curious and thought, why not. Tried to update and it offered me 3.01 by Teclast. So I agreed and restarted. The update went fine but now my SD card stopped working. Dammit..

try to restore bios to defaults my friend

[CpA]

I’ve done a reset to defaults and now my sd it’s working on Windows again.

I’m booting in Android to see what happen…

[CpA]

Everything is right on my side. I cannot test the 64gb sd card because it is defective and I wait for a remplace, but the rest are working when it were not before…

<span style=”line-height: 1.5;”>I’m quite happy by now…</span>

[wpbear]

Where is the link for the latest bios?

Instructions for install?

[CpA]

wpbear wrote:

Where is the link for the latest bios? Instructions for install?

<span style=”line-height: 1.5;”>It’s explained at the first post (OP)</span>

[Maria Maddalena Bignardelli]

CpA wrote:

Everything is right on my side. I cannot test the 64gb sd card because it is defective and I wait for a remplace, but the rest are working when it were not before… <span style=”line-height: 1.5;”>I’m quite happy by now…</span>

Hi did you take the update on line? Whit the new way?!

 

[Luis]

Did the firmware update, BIOS Setup shows tPad 3.02, Windows device manager, Teclast System firmware 3.01. Restored BIOS defaults.

My 64GB micro SD card only works with 8.1 drivers, just as before with tPad 3.0.

 

[Razer Spoon]

I get the update for 3.01 in device manager finally something but when i do it and restarts it doesn’t go through process. When i go back in windows says i need to restart and still doesn’t do it.

[Razer Spoon]

Here’s a picture still stuck still doesn’t do update process during the restart after selecting it.

[J.F.]

For me was exactly the same but after three reboots all is right now.

The way I do it last time was:

Once the device manager detect an install the update, uncheck automatically reboot, close device manager and reboot manually.

Wait the bios update process (black screen with white letters) until it ask you to press a key and then press one of the volume buttons.

Restart device and go to bios (Power + Volume Up)

Reset bios to defaults.

That way the update get finished and Firmware don’t have yellow mark anymore.

The only problem is that my 64GB Samsung SD still not recognized. Error 10 as before.

[Razer Spoon]

J.F. wrote:

For me was exactly the same but after three reboots all is right now.

The way I do it last time was:

Once the device manager detect an install the update, uncheck automatically reboot, close device manager and reboot manually.

Wait the bios update process (black screen with white letters) until it ask you to press a key and then press one of the volume buttons.

Restart device and go to bios (Power + Volume Up)

Reset bios to defaults.

That way the update get finished and Firmware don’t have yellow mark anymore.

The only problem is that my 64GB Samsung SD still not recognized. Error 10 as before.

I tired that still same issue.

[Author]

Posts