EZBook 3 Pro not working kingspec 2242 256ssd

[Pascal Zinken]

I read that there are special Kingspec ssd for our Ezbook pro: https://nl.aliexpress.com/item/KingSpec-22-42mm-NGFF-SSD-256GB-SATA-III-6Gb-s-Internal-Solid-State-Drive-NGFF-For/32741153443.html

It says in the description that it is for Jumper Ezbook 3 pro….maybe a solution ????

[Phill]

Pascal Zinken wrote:

I read that there are special Kingspec ssd for our Ezbook pro: https://nl.aliexpress.com/item/KingSpec-22-42mm-NGFF-SSD-256GB-SATA-III-6Gb-s-Internal-Solid-State-Drive-NGFF-For/32741153443.html It says in the description that it is for Jumper Ezbook 3 pro….maybe a solution ????

Just buy another SSD drive. Crucial, Intel drives works fine

[Tokat]

Adem can you See it in Windows AS a storage or Not ?

[ADEM]

Pascal Zinken wrote:

<span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Bizim Ezbook pro için özel Kingspec ssd olduğunu okudum: https://nl.aliexpress.com/item/KingSpec-22-42mm-NGFF-SSD-256GB-SATA-III-6Gb-s-Internal-Solid-State -Drive-NGFF-için / 32741153443.html</span></span> <span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Açıklamada Jumper Ezbook 3 pro için olduğunu söylüyor.</span></span>

 

friend;
I already bought this product.
but I can not see bios either.
I can not build windows.
does not boot. 🙁

[ADEM]

Tokat wrote:

Adem can you See it in Windows AS a storage or Not ?

yes I can see it as 2nd disk.
I formatted it on a computer with windows7 by taking the external disk box.
I installed a friend’s mod-AHCI driver named fernando.
I can use it as a 64gb emmc + 238gb ssd.
but I can not clone nor install new.
because it does not boot.

[ADEM]

Phill wrote:

<span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Pascal Zinken yazdı:</span></span>

<span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Bizim Ezbook pro için özel Kingspec ssd olduğunu okudum: https://nl.aliexpress.com/item/KingSpec-22-42mm-NGFF-SSD-256GB-SATA-III-6Gb-s-Internal-Solid-State -Drive-NGFF-For / 32741153443.html Bu açıklama Jumper Ezbook 3 pro için olduğunu söylüyor… .Bir çözüm bir ????</span></span>

<span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Sadece başka bir SSD sürücüsü al. </span><span style=”vertical-align: inherit;”>Önemli, Intel sürücüler iyi çalışıyor</span></span>

Should I buy a new SSD?
If I buy another ssd, will my problem be resolved?
I want to install SSD and windows10 I bought.
Shing has been eliminated as the KingSpec 256GB only works as an external storage disk.
I did not buy it for this purpose.
I already have an external hard drive.
🙁 🙁

[Santos]

I have a worse problem. I installed the  Kingspec 2242 256SSD, but Windows can’t see it. Neither appears in Bios.
What should I do?

[Tokat]

Friends your BIOS is locked because of them you can only use The SSD AS a storage and cannot boot Windows over SSD.

You have to is unlock The BIOS and try again!

[ADEM]

Santos wrote:

<span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”>Daha kötü bir problemim var. </span><span style=”vertical-align: inherit;”>Kingspec 2242 256SSD’yi yükledim, ancak Windows bunu göremiyor. </span><span style=”vertical-align: inherit;”>Bios’ta da görünmez. </span></span><span style=”vertical-align: inherit;”><span style=”vertical-align: inherit;”> Ne yapmalıyım?</span></span>

 

I was having the same problem.
Instead of the intel driver, will you try the driver on the link below?
I solved the problem this way.
but bios does not seem to be ubiquitous either.
I can not build windows into SSD.

https://www.win-raid.com/t3225f23-Intel-Apollo-Lake-N-SoC-AHCI-RST.html

[Mehtevas]

It seems that all ezbook 3 pro after the v3 has a lot of problems with SSDs. In my opinion you have two options: 1) buy another SSD of a international brand like Intel, Transcend, Crucial, Samsung. WD seems to have some issue. 2) buy a case for m.2 and use it like a fast external ssd (thx @Chupa for this idea).

[Chupa]

did you guys make a migrate OS to SSD transfer with minitool partition wizard free?

If you have a workable cloned ssd then it should show up in your bios under boot options. Even a locked bios has these options for the user to change.

Attachments:

You must be logged in to view attached files.

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Tokat]

Chupa can you make a Tutorial thread about IT please how to make IT with this Tool or how make IT Work with your solution !

[Chupa]

already did today

 

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[tomek]

Hi there,

Chupa when are u going to publish it? 🙂

[Chupa]

use search

or look here

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Author]

Posts