Solutions or Not ?

[Chupa]

it is all right here on the forum, you just need to spend some time and read through it. start from November 2017 and then you will know. I know, because it helped me and I added some pretty useful stuff too. You even have video tutorials here.

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Tokat]

Thanks for ansering Chupa you know i have to newest Version of the Jumper and in Forum The Most of the topics are Not useful IT Happens Always a Problem with booting or Not visible ssd!

You Always Post Always The minitool utility Programm how can we use IT and how to avoid Problems with The New Version of Jumper!

And i read The Most of topics about increase the TDP but Most of them are fore unlocked BIOS and i dont how to use The ThrottleStop!

 

[Chupa]

https://techtablets.com/forum/topic/throttlestop-or-how-to-run-gtav-with-your-jumper-15w-tdp/

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Chupa]

migration is simple, put ssd in an usb adapter and connect to pc,  install the mini tool program, start, choose mini tool.

click on migrate OS to SSD choose the new drive, if it does not show up format with ntfs first and try again.

click on the Apply checkmark (top left)

click OK to pre-selected choices.

The pc might to reboot and finish the copy in dos mode (automatically)

just wait for a time and the cloning is done.

stick the ssd in computer, go into bios and change from emmc to ssd boot sequence.

If it boots remove boot partition from emmc and use emmc as backup storage.

If things fail, clone ssd back to emmc, change bios boot order and do whatever feels right. Beer, hammer, window or just live with it.

picture shows the UI where my 256 is cloned onto a 512GB

Attachments:

You must be logged in to view attached files.

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[snorbaard]

Hi Chupa, thanks for your comments.

Is it possible to clone the eMMC to the SSD while the SSD is in the M.2 slot because I didn’t see anyone else mention that you need a M.2 to USB adapter? I don’t have access to one and it is a waste of money if I have to order that adapter.

[Chupa]

you have to try, it depends on your bios and hardware. if not spend 8$ for an usb3 adapter with case or 5 for one without

Need Help?
1981 soldered my first Sinclair computer 1K, tapedeck * 1984 build and sold IBM clones 8Mhz, 512K, 20MB HDD * 2018 messing with ultrabooks

[Author]

Posts