X2Pro

[Jakob Schmidt Rasmussen]

Daniel wrote:

Im wondering if theres another forum as well. About your heat-problem @jakob-rasmussen (who I guess is a danish neighbor) I have ordered thermal pads and im suppose to get them this week. I will post afterwords if the temps improved and how I did it so you can do the same

thx for the reply neighboor, about the effect of the thermal mod, have you tryed the intel ETU benchmark, in mine it goes 92degrees in no time.https://downloadcenter.intel.com/download/24075/Intel-Extreme-Tuning-Utility-Intel-XTU-
I have also recieved, both pads and copper plates, though missing the gelpaste..the copper plates looks good with the price in mind and partically apreciate that its a lot in 6 differencce w-sizes from 0.3mm to 1.5mm..
if the thermal capilities is good, cant yet say, but for 0.70US shipped for 6 diff plates, i aint got high hopes.. link #21479
Have asked gearbest about the weight and why mine x2 comes in at 915grams and if it doe too clips vs adhesive or? in regards to detailed 844gram, but as expected they just take you for round-about amongst the different employes.
about the extreme pour wifi range, is the wifi antenna visible and connected thrue UFL pins, like is useally the norm on handheld mobile devices these years. got a bunch (pic) of new wifi antennas for some of the modern devices, that i purchased for close to no money to use on routers and RC transmitters and if it could be down to just exchange or multiple wifi antennas in the X2, because the speed is decent when standing infront of the router where i get 50mb on both up and down, and thats solid enough for an N standard, but just moving a few meters back it dropped massively to like under 5mb ..would also be great if its was possible to take the inner cirquit for like an small AC600-wifi to 9US and just hijacked & solder it to the pins under the hood..
the screen really comes a live for an non laminated fare away screen like this, by tweaking the settings in intels adjustment and with a brightness under 20..

(//site aint to happy with attachements (pictures) and just take the reply in to no mans land and dissepear’ so you need to write it all over again)

[Jakob Schmidt Rasmussen]

picturetest, hmm weird that it takes it here..

Attachments:

You must be logged in to view attached files.

[Jakob Schmidt Rasmussen]

Nordicbirch wrote:

Also, the stylus (teclast stylus from gearbest) works otherwise but handwriting input is greyd out in keyboard alternatives. Did I miss a driver? Thanks in advance, keep up the good work!

// Havent done an clean install yet, but the greyd-out handwriting also is the case on mine, if I aint in english, if i turn on english it becomes active again.. if a driver or an update can fix it, likely if it exist..:-)

[Jakob Schmidt Rasmussen]

//deleted old post hanging ‘ precurius-sitesystem under firefox osx, where once reply popping up after numerous hours // deleted..

Will use this fail_post from earlyer today, for relevance..

Recieved an usb 3.0 card reader and tested the x2 ports with an 14us shipped 64GB kingston gearbest microsd card and got these values on dm5.x64..

The slower values is the same card but in the original tf slot that sadly is on 2.0 bandwitch  and with dm3x64 version..

Its this 3.0 fellow that is valid for up to 512gb card, and I gave 2.65US shipped and with the price in mind, ts an solid item…http://www.aliexpress.com/item/OV-USB-3-0-Micro-SD-Reader-Max-Support-512GB-SDXC-Card-Reader-SD-Card-C307/32576810896.html

Seems quite priceattractive for stylus?.. http://www.ebay.com/itm/4-pcs-AAAA-4A-1-5V-LR61-MN2500-E96-GP25A-Alkaline-Single-Use-Battery-Hyper-/131486594388?hash=item1e9d363554:g:oVUAAOSw1XdUWwfZ

Attachments:

You must be logged in to view attached files.

[Nordicbirch]

Jakob Schmidt Rasmussen wrote:

// Havent done an clean install yet, but the greyd-out handwriting also is the case on mine, if I aint in english, if i turn on english it becomes active again.. if a driver or an update can fix it, likely if it exist..:-)

Thank you. Guess the handwriting recog. only works for english – in other words I missed the most obvious answer 🙂 (I use english as my system language but it’s not my native tongue, so I’ll forget the input language on non-english randomly)

[Daniel]

@jakob-rasmussen No I havent done a benchmark. And now my ssd has borke down so Im waiting for my new one to arrive later this week I hope. I will run a benchmark when I have installed it.

Im looking forward to see what you have to say about the wifi-antennas. I too was thinking that there might be a chance to solder on a usb wifi dongle to the pins on the motherboard. I hope the four pins are easy to work with.

[Thomas Riley]

So, I’m from the US and I want to add a 3g/4g modem to my X2 Pro.

What modem do I need?

Huawei ME906V

Huawei ME906E

Huawei ME906X

[Jakob Schmidt Rasmussen]

Thomas Riley wrote:

So, I’m from the US and I want to add a 3g/4g modem to my X2 Pro. What modem do I need? Huawei ME906V Huawei ME906E Huawei ME906X

Not sure Riley, since i havent been down that path myself, and from EU (DK) but I remember that there is a lot on some of the past pages in this thread about 4g on X2 and partically the user Hualalai have great insight into the g4 cards, and wrote about the matter, but i did notice that there was some problems with driver on win10 with Huawei me906 cards and partically when it come to the US..

i recall the E-model was for Europe, and the V for US bandwitch, but its stated on some of the earlyer pages

for the EU I got the impression that Huawei 906e worked great ewen thow funded on USB2.0 and GPS-signal got some hazzle thrue the metalcover.. but overall if Huawei ME906 4g modem is the best card atm for an upgrade for the X2 and how the range is in praksis ‘ I got no idea, and would love some insigts into this as well..

// there is some information about the matter here..http://techtablets.com/forum/topic/how-to-open-an-x2-pro-and-popular-mods/

any feedback on the sierra EM7455 or yet to early, ref 1q 2016..

[Daniel]

Thomas Riley wrote:

So, I’m from the US and I want to add a 3g/4g modem to my X2 Pro. What modem do I need? Huawei ME906V Huawei ME906E Huawei ME906X

 

I think its best if you just email huawei and ask them

[Fred]

Hi guys, I just made a clean installation but now my pen does not work. Which driver needs to be installed? I’ve already tried installing the ones from downloads but I’m not exactly sure if they were all installed properly, the touch screen works fine though.

[Daniel]

Did you use the pen before the reinstall?

[Fred]

Daniel wrote:

Did you use the pen before the reinstall?

Yes, it worked fine before the reinstall.

[Wa]

Hi, can anyone help me and send a device manager print screen 😉 Just like on the pictures. I’m looking for someone who has x2 pro with original “teclast” windows version ;).

Attachments:

You must be logged in to view attached files.

[Daniel]

I bought this replacement ssd: http://www.transcend-info.com/Products/No-642

But it doesnt show up in bios. Is it not compatible with the x2 pro for some reason?

[victor]

Hello to everyone.

First of all, thanks for your experiences and advices. I ordered a X2 Pro today, in Gearbest, with keyboard and stylus. I’ll keep you informed on the evolution of my order (hope it will not spen too much time to arrive, I chose EU warehouse for my order).

I’ll use it as it comes for a while, but I am seriously considering replacing the SSD with a bigger one.

When putting my hands on it I’ll replace the Windows and make a fresh install, hope not to have many problems 🙂

Read you.

[Author]

Posts