[Bernardo Pinto]

What about How to: Dualboot android/windows on K9C6? Any help? I need urgent help to revert mine from windows 10 only to dualboot.

 

Thanks all.

 

[Bernardo Pinto]

I would suggest you take a look at the Cube i7 / Cube i7 Stylus review, those are probably the most reliable and price efficient tablets available from China. The Cube i9 should be no different, it pretty much uses the same base (Emdoor mainboard) and Aluminium cover layout.

I see. I will do that, thanks Viktor.

 

Still i’d like to get more opinions on this tablet, am also open to other suggestions.

 

Thanks.

[Bernardo Pinto]

Thanks for posting back the answer, for future reference how did you switch back to dual channel exactly please?

I always accessed the BIOS through the Advanced boot option in recovery tab on Definitions.

So i did that, going to the UEFI firmware boot wich tells you to reboot and then you’re in the BIOS. Or simply get into the BIOS by your own methods, this is how i do, no need to follow if you can acess the BIOS easier than this.

On the BIOS front page, you have a “Channel Selection” option wich you can set to Single, Dual or Auto.

I know so far that Single only reads 1 memory ram in this case, only 2gbRAM were being read.

And Dual is what you want. Dual reads both 2GB rams, wich makes 4GB.

I never tried auto so i won’t dwell, but for some reason when i formatted my tablet it went from dual to single without knowing.

Always remember to try and speak with your seller and maybe he does a better job at reaching the tablet brand company so they can help you. That’s what i did.

 

Thanks for all your help.

[Bernardo Pinto]

I figured it out.

Spoke with my seller from Aliexpress and she spoke with teclast support.

Apparently when i formatted the tablet the channel in the BIOS, went from dual to Single, just had to switch it back to Dual so it can read 4GB instead of 2GB.

 

It was THAT simple ._.

[Bernardo Pinto]

Figured it out!!

Spoke with my seller from Aliexpress and she spoke with teclast support.

Apparently the channel on BIOS went from Dual to single when i formatted the tablet, i just needed to switch back to dual( you can choose from single to dual to Auto(Dual is the key))

[Bernardo Pinto]

First make sure that BIOS is recognising the whole 4GB by going into BIOS setup and looking at the total memory.

Good point Jonathan, i did and the BIOS only detects 2048MB (DDR3).

Any idea why?

Thanks

[Bernardo Pinto]

Alright so …

Did everything like the tutorial on how to format Teclast X98 Pro, plus formatted about 2-3 now but the tablet still detects ONLY 2gb RAM, not 4 as it was before…

Yes, i used a x64 setup only, and still the problem persists…

Any idea?

[Bernardo Pinto]

I’m going to try format it again using the mediacreation tool. I feel like something is off from the format phase.Will let you know.

[Bernardo Pinto]

I did everything like in that discussion, i formated the tablet using my laptop’s OS(x64 only) in GPT partition.

I formated with the help of a hub, mouse and keyboard, and installed the drivers using the double driver backup, i overlooked the touchsetting.gt file, so thanks for that.

The only thing weird is it only has 2GB ram available..

 

[Author]

Posts