[Daniel]

Yes Karl. That´s totally true. I have no idea, and I´ve been learning everything I know from this and other forums during the last 4 weeks

The thing is that I said REboot because of a mistake in my personal translation about what I´m doing, what I wante to say is just boot that way (the way I read in previous posts from Dani, you and others)

The only thing that I know by sure is that I´ve followed exactly and step by step the things that you all are trying to explain me, and nothing else, because I don´t dare to do something that I don´t know

The drivers that I´ve installed are exactly the 3 ones you said and in that order….and my tablet don´t get recognized. Nor in my computer nor in other 3 windows computer with different windows versions and different cables…so…it is not my computer, and it is not the microÚSB connection from the tablet, because it works perfectly for any other situation (Storage, power and even ethernet)

And the last thing I tried was boot the tablet from shooting down from Android as Dani said…and then I got trapped again into that boot to BIOS loop…that now I´ve fixed and again(I have no problem with my eMMC memory so I don´t have to do that link that I know from weeks ago…I guess!) has my tablet working on W10, stucked at Intel Logo for Android and not recognized by any computer in any way even following the steps I read

I´ll try one more time today…install the drivers you say, in that order one moroe time, and then do the recovery to have again Android working….but this is the 3rd time….and I follow the steps one by one. I´ll tell you all when I got the results today!

Thanks a lot and I´ll keep on trying and telling

Really appreciate

Daniel

 

 

[Daniel]

I tried with more than 10 different drivers to get my tablet recognized by my computer, and nothing, so if you get it, please, share

About the fastboot is that mode with the yellow letters but boot loader is the mode that you get in when you follow the instructions and the tablet starts getting inside the software as he (G.Llark) explain step by step

The thing is that I cannot explain you any more detail because I cannot even start cause my tablet is not recognized and then i cannot initiate the process…so…not much to tell

Keep on working…

[Daniel]

Hi Beto RM!

Well….tons of things and different options

First of all…I promise…I´m not an expert compared to you! You got your tablet recognized by your computer…I DON´T! HAHAHA

Second…returning the device?….difficult to say. It is totally up to you…but in general, not too many people does it. Long time, not safe about the next device…but sometimes it works! I don´t know what to say.

Third…the drivers. This is my deadpoint. Valerima, G.Llark and others had shared their files, and even so, I cannot find the right drivers. Those that work for them, doesn´t work for me…so, it seems to be something with my computer, I thought! But then I tried with other 3 computers, differen OS (W7, W8.1 and W10) with 2 different cables and…nothing! So, it is not my computer.

I´m still waiting for an answer in other post…or here, but…this is difficult to find. So I cannot help you with that.

Be patient as Valerime advice me very well and…keep on working! Sorry for not givin you a better solution…but…I´m not an expert at all…HAHAHA…

By the way…WELCOME!

Daniel

[Daniel]

….WWWWOOOOAAAAAA….

Trying to reboot that way, I´ve got trapped in an infinite loop of restarting and bios impossible to exit to a normal booting…

I know is not your fault, but…Any idea about how to come back to my stable windows option?

Thanks!

 

Daniel

[Daniel]

Hi you all!

Finally I could download the file…it seems to be a problem with the Chinese Great Wall, but now it´s done

The thing is.. that..There is no way to complete (even start) the process!!!

Each time I try…always the same problem. I cannot even try because the tablet is not recogniced by the system in anyway…

I´ve tried many different packages of drivers and adb´s…and nothing

Could somone give me an idea?

Each time I try to install Intel Android USB Driver, I receive this

x64 os
Windows version: 7
Installing drivers, please wait
drvinstall.exe intc_usbcomp.inf returned 0
drvinstall.exe intc_cdcserial.inf returned 0
drvinstall.exe intc_rndis.inf returned 0
drvinstall.exe intc_mtp.inf returned 0
drvinstall.exe intc_adb.inf returned 0
drvinstall.exe intc_dvctrace.inf returned 0

but it says INSTALLATION SUCCESSFUL!

the thing is that my tablet is not recogniced by my computer when it is turned on under windows (each of the devices) or when it is in DNX Fastboot mode unde ADB….

so…what can I do? Any idea?

THANKS A LOT

Daniel

 

UPDATE:

I´ve tested my Teclast X98Pro K9C6 with W10 (fully updated) USB connection with 3 different Usb to MicroUSB calbles into 3 different computers running W7, W8.1 and W10, and NONE of them recognice the tablet as a device. Nothing appears. There is no way to get my tablet recogniced….so I cannot even try to start any process about TWRP or any other…
ANY IDEA?

THANKS IN ADVANCE FOR YOUR HELP

[Daniel]

Hi all!

There is no way

Each time I try…always the same problem. I cannot even try because the tablet is not recogniced by the system in anyway…

I´ve tried many different packages of drivers and adb´s…and nothing

Could somone give me an idea?

Each time I try to install Intel Android USB Driver, I receive this

x64 os
Windows version: 7
Installing drivers, please wait
drvinstall.exe intc_usbcomp.inf returned 0
drvinstall.exe intc_cdcserial.inf returned 0
drvinstall.exe intc_rndis.inf returned 0
drvinstall.exe intc_mtp.inf returned 0
drvinstall.exe intc_adb.inf returned 0
drvinstall.exe intc_dvctrace.inf returned 0

but it says INSTALLATION SUCCESSFUL!

the thing is that my tablet is not recogniced by my computer when it is turned on under windows (each of the devices) or when it is in DNX Fastboot mode unde ADB….

so…what can I do? Any idea?

THANKS A LOT

Daniel

UPDATE:

I´ve tested my Teclast X98Pro K9C6 with W10 (fully updated) USB connection with 3 different Usb to MicroUSB calbles into 3 different computers running W7, W8.1 and W10, and NONE of them recognice the tablet as a device. Nothing appears. There is no way to get my tablet recogniced….so I cannot even try to start any process about TWRP or any other…
ANY IDEA?

THANKS IN ADVANCE FOR YOUR HELP

[Daniel]

Again and again and again…THANKS THANKS THANKS for your infinite patience and help. I really appreciate it

Thanks for the explanations and details, but…I have a small BIG problem

You are really great explaining these thing to me….but…after doing everything, preparing every  file, reading several tutorials, and following your steps…the BIG problem is that THERE IS NO WAY TO: get my tablet recognized by my computer, and there is no way to get the Universal Drivers installed too

Even followin step by step every single process several times. They do like they are installed, but nothing happens.

It is like if something is wrong in my computer (DELL XPS L702X – W7 )

Please, I´m working on it, so, if after some more attempts I get nothing, maybe (it is embarrassing…) I´ll try to ask for help, but…that´s all.
I cannot even start this wonderful explanation you showed me because of the ADB, USB Drivers, And recongnicing tablet is not possible…so…I´ll keep on working…

 

Thanks…I´ll keep you informed.

I´m downloading more Universal Drivers and others ADB….

 

Daniel

[Daniel]

Ok…I´ll try again!

Thanks for telling me…probably the reason is me…I´m livin in China….but even with the VPN it didn´t work, with more than 10 attempts! hahaha

 

But I´ll be patient and try again

I´ll tell you! Thanks for your collaboration you all!

Daniel

P.S.: Just for you to know…I´ve tried with every single file you can see in the image attached…and nothing. Most of the times, even I don´t get the option to install anything for Android…it doesn´t appear on the process as most of the step by step show. Something must be wrong with me and my computer. It does nothing when I plug in the tablet…an…all these options (image) have been tested, any idea? THANKS IN ADVANCE

Attachments:

You must be logged in to view attached files.

[Daniel]

Good morning and THANKS for all your hard work and explanations. I´m following your work and help, together with some extra help from other people. Everything is fine but…there is no way to download the new version..

TWRP-2.8.7.0_teclast_x98pro-b2

Is it still there? each time I try…it says no document available…sorry, it says RESOURCE UNAVAILABLE (once it appears and you click on the “down” arrow to download….)
I´ve checked with the first one you linked at the beginning of this post…and happens the same. Appears the download page, but when you want to download it…resource unavailable…(maybe some google problems…I´ll wait, but just in case for you to know…THANKS)

So, @Dani Basabe…if you could comfirm it…

THANKS!

Daniel

[Daniel]

OMG!…OMG!…OMG!!!…

….mmmm…I don´t know what to say!

Now I fell a “little bit” embarrased!

Well…the first of all…THANKS, BIG THANKS

I really appreciate that extra time and explanation! It is awesome!

I promise you I was doing my “homework” and I was investigating and learning some tutorials about TWRP and other details as I told you, but your detailed explanation goes much further and beyond! WHAT I REALLY APPRECIATE, because there is no tutorial to explain details I need…but yours! HAHAHA

Really thank you.

 

Now I have no excuses and I´m going to try to complete that in my X98Pro K9c6

 

I really appreciate tiny explanation like where to type in, tablet or pc, what is fastboot (tiny program running on my pc…I thought it was a mode of booting my tablet and I was going crazy!!! I was confused bwtween the exe fastboot, and the dnx fastboot…and i got totally lost with that tiny thing…thanks for the detailed explanation!!!)

About the drivers and so on…I found some help over there, and I have some downloads done (my homework)…we will see if it works!

I think that now I have it clear enough…only need some time to work on it.

I´ll tell you the results

 

But please…only a couple of extra questions.

1. Doesn´t need to be rooted the Android partition? (all the help and tutorials I found say that…)
2. And what about the difference between these boot and image you share (700mb) and the one that Valerima share from Dani Vasabe (25mb) Do they do the same?

THANKS TILL THE END OF THE EXISTENCE! AND BEYOND….

I´ll work on this asap

Daniel

[Daniel]

Hi G. Llark and Valerima

Please, when you read my next post, don´t you think please, that I´m asking for a personal TWRP tutoring class! It is only that all these questions come to me…and maybe you could help me with some details you consider too obvious, but are not for people like me.

That´s all

 

I´m reading several guides to stay up to date…but even so, any help, would be very welcomed

 

Thanks in advance

 

Daniel

[Daniel]

Thanks Valerima for keep on helping

Thanks Dani Vasabe for the original post at XDA

Thanks G.Llark for the remake and possible an easier solution!

I´ve been all the weekend out of the system, and I´ve just read these posts.

SOUNDS INTERESTING!! And….a possible final solution

But honestly…I don´t know what to do at any single step. When you talk about a port, I don´t know what port are you talking about. When you talk about TWRP…I have ever seen those letters together! (haha) when you say type in…where? Tablet? Computer? how? (hahaha) I feel like a baby, and I´m varely learning all these process….so…give me sometime, but some advices too

I´vee been looking for help on internet, and always happens the same, everybody talk about these 3 main doubts like if it was my breakfast…so..I don´t know even how to start.

If you could explain these 3 details, and with the research I´m going to do today…I´ll try this afternoon

Sorry for being such a disaster, but I insisct. THANK YOU AGAIN.

 

Now, Specifically about @G. Llark optional way:

1.- I know how to extract 2 files out in the same place

2.- I know how to SET fastboot on my tablet…

3.- …but…what mean “copy the 2 files in the same directory where the fastboot app resides? into my tablet directory? which directory? how? (my computer doesn´t recognice the tablet if it is not under windows or under android…I DONT UNDERSTAND CLEARLY THIS STEP…thanks

4.- If then I have to go to point 3 of Valerima….to connect my  tablet via USB…it was not connected before?

5.-  The response line in the next row about my tablet being recognized…where? Android? Windows? my tablet? my computer?

6.- …and so on again and again each time I have to type in something…

 

So sorry for so many questions, but is just to give you an idea about how lost I am.

 

The main thing is…this option you give us @G. Llark…is…total reinstall of Android?

PLEASE, VERY IMPORTANT TO KNOW…something would happen to the Windows side? Any change or reinstall? I don´t want it to get affected…

And Finally…this option is much much heavier than the TWRP…isn´t it? 700mb? what is it? The TWRP is like recover where I was? and this one is reinstall?…..THANKS FOR YOUR PATIENCE and HELP in ADVANCE

Daniel

[Daniel]

Nice to know!!!
A big group here were, in another post with Android problems, waiting for some information about it….

 

Thanks

[Daniel]

As always with your links and comments…we have another option!
But still sounds too tricky for me

I´ve been reading and…not safe and stable

I think I won´t try….

Keep on looking for. Today is rainy…so..hours in front of the computer! LETS GO!

 

Daniel

[Daniel]

Thanks Valerima

I think I´ll do that. Try to live with it, and wait for a solution. And then…intall the right Android. It is not good to eliminate a good option havind the dual bood mode…I´ll be patient! hahaha

I really appreciate the time you dedicate to help me and us

Thanks

[Author]

Posts