[enfxuevsi]

The baidu link was found in a driver download on the chinese version of the ezpad website. I can’t recall the device the driver download was for I’m afraid. The 5s perhaps if that was on there, it was a long while ago.

[enfxuevsi]

You’re welcome to it!

http://pan.baidu.com/share/home?uk=1276610098#category/type=0

[enfxuevsi]

Been looking into this also. Best I’ve found so far is a Chinese link to some images (install.wim and winre.wim) for the 5S. Also, a bios file. Probably what the tablet comes with as standard (jumper8S16xV1.MABDEBA02.bin). (It is the same, checked my tablets bios against this).

Furthermore there seems to be a bios flashing tool which uses an image of WINPE and some seperate scripts and tools that will run from the same USB as WINPE when booted from on the tablet.

That’s about as far as I’ve gotten. I had a brief look through the scripts. From a quick look, I’d say you boot into WINPE with these scripts and tools on the WINPE USB, it then maps the hard drive, does some stuff, installs the windows image from install.wim, moves the WINRE to a recovery partition, flashes the bios and (potentially) sets up dualboot, I assume at least from looking into the files named in the script, which appear to modify bios settings for single or dualboot based on the script settings.

However there’s no sign of an android rom here, so they’re possibly test images/files or factory files for preparing the tablets. May look into this further over the next few days.

[enfxuevsi]

Sileadtouch.fw

Taken straight from System32.

[enfxuevsi]

1. Battery life doesn’t display properly here either. Always says calculating… in Windows.
Not sure about the discharge.
Charging is slow, yes. Charger provided is 800mA for a wall socket here so, I’m not surprised it sucks honestly. Still it does charge albeit slowly and will charge in use, just extremely slowly.
2. Only tried a 64gb Samsung Evo microSD which is functioning fine for me.
3. No idea, disabled sleep and such to attempt to improve battery function.
4. Not had anything like this occur, sorry.

[enfxuevsi]

I will upload the drivers I took from my pad in case that will help you. Will take me 10 minutes maybe. Will edit in a link.
Drivers Link IS HERE

Hope that can help you!

[enfxuevsi]

Eh if I had another adapter I’d try, but I’ll make do. It does charge in uses just ever so slowly, airplane mode will be my go to when doing office work.

 

Just dumped the drivers to insert into a fresh windows iso, will see how that goes in the next few days. Going to play around with the bios in the mean time, very refreshing to see so many options open to configuration. I think upping the minimum dedicated graphics ram will be my first investment, boost is enabled regardless but with only 32mb dedicated I think it was, some of my programs will benefit from a base increase. Also curious to see if jumper release an android build for this device going by the bios, or if we see a similar device for porting, they do manufacture/design devices for other OEMs so I expect if not through jumper android may become available.

[enfxuevsi]

 

What’s charge speed like for you folks? I plugged it in to charge and the percentage didn’t move AT ALL in 10 minutes, I’m half wondering if my device can even charge whilst in use o.O. Batterybar lists a charge rate of 0. Not promising…… I turned it off and left the house for 4 hours, possibly more and got from 0% to 70%. Not amazing :\.

[Author]

Posts