georgo85

georgo85

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #182645
    georgo85
    Participant
    • Posts: 5

    Thanks for sharing man!Really appreciate it!

    Unfortunately it didn’t work, suborn igpu all that power end still 450 Mhz 😛

    #182599
    georgo85
    Participant
    • Posts: 5

    I really don’t think that this is the case because when I set the maximum battery in intel graphics plan in power options it doesn’t lower the clocks and also at high performance settings I don’t get even a second of clocks higher than 450 Mhz. At 50 degrees cant be thermal throttling. I will try to make a new installation of windows rather than just reseting the tablet.

    This is what happens when you buy a tablet that Chris hasn’t reviewed 😛

    BTW I get decent geekbench 4 scores regardless the power limits  https://browser.geekbench.com/user/274688

    #182585
    georgo85
    Participant
    • Posts: 5

    Sooo after a lot of research (I really like max Mhz in my gpu :P) I found that actually the intel graphics plan in power options doesn’t affect the gpu clocks at all, as you can see in screenshots.

    It seems that it is stuck at balanced at all times at 450 Mhz max not even a little spike at 700Mhz. I tried change it with Control Panel for Intel Graphics, I updated the graphics drivers and uninstalled TPDF. Can this be a bios thing? I also disabled c states and  TPDF from there and everything seems at maximum performance. I even reset the tablet but no luck.

    Has anyone encountered a similar problem? Thanks again for your time 🙂

    Attachments:
    You must be logged in to view attached files.
    #182562
    georgo85
    Participant
    • Posts: 5

    Hi Chris

    I haven’t seen the max gpu going over 450 even for a second and also according to throttlestop the limit is pl1 and some times edp current. Maybe if I tweek a bit the DPTF settings in bios.??

    EDIT: No luck after disabling DPTF

    PS. Thermals are OK compared to knote 8 with the m3 core!!

    Attachments:
    You must be logged in to view attached files.
    #182555
    georgo85
    Participant
    • Posts: 5

    Hi guys

    Its my first post here and I wanted to thank Chris, Henk and the others here in this forum for their valuable help.

    Now after reading all the posts I can run my Alldocube Knote x pro (n4100) at 15 watts using these settings:

    W16 0xFED170A8 0000
    W16 0xFED170AC 0000

    WRMSR 0x610 0x0 0x00DD8F00 0

    My cpu speeds are maxed but gpu seems stubborn and cant go over 450 Mhz.

    Is there anyone with the same tablet that achieved higher gpu speeds?

Viewing 5 posts - 1 through 5 (of 5 total)

Lost Password

Skip to toolbar