[Mathew]

using batterymon software

it looks like when i first plug in its charging at 11v, then ramps down to 4 – 5v.

*edit* ok so thats not volts thats watts lol. If i let the batter discharge more it will stay charging at 13.4 watts

This was with the unit at 98% it could be ramping down due to almost full charge, i will let it discharge significantly and try again

 

When i first got the combo, for a dead battery the ETA as soon as it powered on was 3 hours for a full charge.

 

[Mathew]

@walter

ya i broke the tip off my original one.

Yes those were the two i bought

how can i check if its charging at 12v and not 5v?

specs on the cable it says

Charge compatible devices at up to 5V 3A

[Mathew]

@beavis

Ya try a better cable, same thing if i swap that same charger to a cheaper cable it wont charge.

Is your current cable a cheaper OEM type cable?

I had originally bought just the charger, thinking it came with cable. It didnt. So i tired the various USB-C cables i had. None worked

I found another thread where that AUSKEY cable was on the known working combo list, so i bought that and 2 days later amazon delivered and it worked!

hope you can find a combo that works too

 

🙂

[Mathew]

Been following this thread a few days and can confirm the following combo works

https://www.amazon.ca/gp/product/B01D821UKK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.ca/gp/product/B06Y427WT7/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

ETA on a full charge form a complete drained battery unit is 3 hrs

[Author]

Posts