Hello
I also had same problem with my Teclas x80. I followed the russian guide and it solved the issue of SD card which suddenly went a-wall
As no everyone speaks russian ( neither do I …did some google translate)
Here is what you have to do.
- Open Windows Setting
- Open “Updates and Security”
- choose recovery

- choose advanced restart

- On Next screen , go for Solve Problems ( Icon with wrench and screwdriver )
- Advanced, Startup settings
- At this point make sure you have your USB OTG plugged in with keyboard, and Restart tablet with pressing the “Restart now”
- Tablet will reboot and On first screen you see different options to boot, choose 7 or F7 to run Windows in mode which will allow to install unsigned drivers
- After reboot , go to Driver Manager and look for Intel SD controller, not SD Storage Class controller which is with exclamation mark

- So in most cases updating one should do the trick but it can happen you need to update all 3. So tap and hold on one and Choose “Update Driver”
- Choose browse my computer

- This is important part…instead just choosing the driver ( which won’t do anything as windows will claim latest driver is installed ) You have to choose ” Pick other driver from list”

- On next screen choose “Have disk” and there you can pick your driver (downloaded and extracted from attachment)
- Windows will say that driver is not signed, with red cirle etc. ..just ignore it and install .
- If needed repeat procedure for other 2 .
- Restart and enjoy your SD card.
- In case SD card will disappear again , you can repeat steps 8-13 to have it back. You don’t have to launch Windows in Special startup mode as driver is already there . You just have to ensure that the correct one is installed to SD card controller
Hope it helps 🙂
Attachments:
You must be
logged in to view attached files.