KoLSMS

KoLSMS

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 12, 2018 at 3:37 pm #141863
    KoLSMS
    Participant
    • Posts: 8

    okay Chupa, i have done it…!

     

    sorry for my stupid questions, it was so easy to get the ssd booting… maybe it was to easy for me, i thought to complicatet?!?!?! now all runs fine, thx a lot for your help for a stupid man 🙂

    April 9, 2018 at 4:08 pm #141693
    KoLSMS
    Participant
    • Posts: 8

    @ Chupa

    Maybe you can provide a little howto how i must prepare my installed kingspec ssd that i can boot from it?

     

    i tested severall solutions but windows 10 is not booting from the ssd.. and the ssd is not shown in the bios… what can i do that the ssd is shown in the bios and i can choose it as boot option?

     

    it would be very great from you

     

    sorry for my bad english

    April 3, 2018 at 6:01 pm #141487
    KoLSMS
    Participant
    • Posts: 8

    Hello,

    i have the same Problem, i have a V4 Humper EZBOOK 3 Pro, all is fine, but i cannot boot from my kingspec SSD… Has anyone bought another SSD and is it working for boot? is it recognized by the bios? Or are all SSDs are not shown in the bios by V4 of Jumper EZBOOK 3 Pro?

    April 3, 2018 at 5:54 pm #141486
    KoLSMS
    Participant
    • Posts: 8

    @ Giovanni

    thanks for your tips and help, i think it is to much work for me to flash the bios via the chip… so i will resend the notebook to the seller and buy a new one… And for the future for me i know: “never make any bios update when you dont understand it really ;)”

     

    so again: thx for your help!

    April 3, 2018 at 10:16 am #141457
    KoLSMS
    Participant
    • Posts: 8
    Giovanni wrote:
    KoLSMS wrote:

    Okay, have done it, nothing is changing! Only black screen and blue Power LED comes up …

    Need to flash the bios manually to the flash chip

    And how can i do that? Is it very difficult?

    April 2, 2018 at 2:47 pm #141428
    KoLSMS
    Participant
    • Posts: 8

    Okay, have done it, nothing is changing! Only black screen and blue Power LED comes up …

    April 2, 2018 at 1:08 pm #141421
    KoLSMS
    Participant
    • Posts: 8
    Giovanni wrote:
    KoLSMS wrote:

    Hello, maybe anyone can help me out there! i have flashed the new bios, i followed step by step the tutorial… All was fine! Now my Jumper isnt anymore booting, i have only the blue power LED on and the display is black, nothing works any longer… is it possible to reactivate my jumper or is it bricked?

    Try disconnecting the battery

    How Long must i do that? Can you say a time? That would be great!

    April 2, 2018 at 11:28 am #141418
    KoLSMS
    Participant
    • Posts: 8

    Hello,

     

    maybe anyone can help me out there!

     

    i have flashed the new bios, i followed step by step the tutorial… All was fine!

    Now my Jumper isnt anymore booting, i have only the blue power LED on and the display is black, nothing works any longer…

     

    is it possible to reactivate my jumper or is it bricked?

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)

Lost Password

Skip to toolbar