[Patrick]

Miguel Ángel wrote:

Patrick wrote:

After much work getting it Open i finaly made a Small thermal Mod on this Tablet. I have put a thermal Pad on the Metal on the Board and closed it again. Without this and a Short Stress Test with Prime 95 i got over 100°! With the Mod it is 74° so a good improvement. I also want to make some editing with the Intel Tuning Programm. What config have you all used? The same from chris? Can someone recoment the config?

could you tell me what measures the thermal pad that you placed? thickness, brand, etc. thank you very much and sorry for my bad English;)

<hr />

So i tested a bit and I am not so happy. Will the standart config of the device, the tenperatures are as i said. But when I put the config up ad Chris made it in his Video, it got over 100°. So the Metal plate on the Tablet is useles. You should build an own One as in the Video.

Have you a gibt, how i can make holes in the Cooper plate for the screws? Would be cool if you have some hint because I never made something like that. I don’t know how Solid copper is

[Patrick]

Yes it was! Thanks a lot <3

[Patrick]

I tested a lot of combinations and it don’t work…I also dont found something like that in the BIOS…

[Patrick]

After much work getting it Open i finaly made a Small thermal Mod on this Tablet. I have put a thermal Pad on the Metal on the Board and closed it again. Without this and a Short Stress Test with Prime 95 i got over 100°! With the Mod it is 74° so a good improvement.

I also want to make some editing with the Intel Tuning Programm. What config have you all used? The same from chris? Can someone recoment the config?

[Patrick]

Do you think the Anker Hub has a longer cable? For me it don’t Looks like that..

[Patrick]

What do you think of this:

http://www.ebay.de/itm/361710081969

 

This Looks perfect and its also cool that is has a sd card Slot. But the price is very Low… Don’t know Maybe its a China bomb…what do you think?

 

[Patrick]

Hello again!

I have changed my mind and I want to buy this:

 

AUKEY USB C Hub with 4 USB 3.0 Ports + 1 HDMI Port + Type-C Input Charging Port

That you confirmed working. If I need a Ethernet Port i will buy a usb Adapter for it.

My question what i now have is: Can I use the Power supply and if yes, how? Some people say it’s risky to charge it that way but I want to know, what i have to buy that I can charge it without damaging the device. Just tell me what I need if it’s ok I don’t want to Risk to Brick the Tablet because I charge it not good..

It would also be nice if you can put it in the first Post so everyone knows it.

 

Thank you

[Patrick]

The problem is i need a Hub with hdmi, Ethernet or hdmi, Ethernet and powersupply

[Patrick]

Hello to you all!

I am compleetly new at the Cube i7 Business and I want to ask you a little bit for advice.

I would like to have a Hub with a Ethernet Port, Hdmi and Maybe some Usb Ports. It would also be perfect if it could charge the Tablet.

Now I am a little feared about the posts that charging via the usb is not good for the decive. Can you offer me what would be good for my need?

Thank you

[Author]

Posts