[Riccardo]

Solved –

Thanks to needabottle that wrote the solution and I did exactly what he did :

“In the end what I did was disable everything in the bios.

I set OS Image ID to Android. (It normally defaults to Windows.)

In Boot option priorities I disabled everything.

Saved changes then hit Android-IA in boot override.

The tablet tried to boot to Windows but crashed with a blue screen with a large saying it couldn’t complete and would shut down and restart.

I let it sit for a couple of minutes and it restarted and went into the OS Select screen with the Android and Windows logos. I went to the top of the screen on the left and there were the small Android, Windows and Folder logo. Touching the Folder showed OS and Menu. I touched menu and it brought the 3 little icons back. I pressed folder again and it put a check (tick) mark in it. I pressed the large Android logo and it booted into Android. Couple of shutdowns and boots into Android and Windows using the OS Select screen and everything is back to normal. The bios had reset to showing Windows as OS Image ID and the Boot Priorities now show

Boot Option1 Android-IA

Boot Option2 UEFI

Boot Option3 Disabled

(I changed them to Android, Windows and UEFI)

Everything seems back to normal.

Phew……..”

Riccardo

[Riccardo]

Hi. I have installed the drivers I found in the mirek 7zip file in my laptop with os windows 10.

The installation works fine. I boot in fastmode (yellow dnx waiting……), i plug into my laptoop che usb/miniusb cable and setup the bat (I dont remember the name of the file). A screen appears and I typed 2 for the clear android installation. Then appears another screen saying searching device or something like that and everything finished in that screen.

Any help?

Riccardo

[Riccardo]

Sorry again.

I performed the  Mirek’s procedure

“FLASHING PROCEDURE
– Install includes 2 drivers (If you did not install earlier).
– Run device in DNX mode (power + vol – + on switched off device).
– Plug USB device and just run .bat files -> my FLASH_tool ”
but the tablet is not detected by my laptop win 10

Are there any particular setting in the bios I have not done?
R

[Riccardo]

Hi

I’ve just bought this: Samsung Evo Plus Evo + 128Gb Micro sdhc classe 10 Mb-Mc 128d, but I’m waiting for the Tablet 🙂

Hope it will work fine

 

Ricca

[Riccardo]

You have ALMOST convinced 🙂

[Riccardo]

Thank you very much
I should have assistence because I bought it from a European intermediary who told me that in the first six months I will have the possibility of replacing the tablet.
So, in case of hardware failure, I’ll  return it in Europe.
I believe/think  the wrong root will cause the failed boot (not hardware problem), but if you tell me that you can restore your tablet to default, I believe and I hope there are will be no problem.

Riccardo

[Riccardo]

maria maddalena bignardelli wrote:

yeees <noscript></noscript>where I can find it?

Same question 🙂

[Riccardo]

Hi

I was reading the tutorial for resizing the partitions, and I wanted to download files from the site  https://mega.nz/#!34pCXTab!d58OsX0QI…uAJRwV20f8tDTI, but for doing it I have to write a key decrypted or so. Do enyone knows what I shall write?

[Riccardo]

Thank’s Gal 🙂

Excuse me again, there are procedures that explain how to flash the BIOS, and how to put a clean image of Windows 10?
Thank you

[Riccardo]

Thank you for the moment.

So, i’ll buy a hub usb. Do you recommend any?

Riccardo

[Author]

Posts