[nanachi]

Wylver wrote:

The second one from Blitzwolf (Banggood link) should work because it has the exact specifications I stated before: 15V 2A “PD” The other one from Ali will NOT work because NO PD and only Quick Charge.

Ok thanks. Still I’m so worried because I heard about Chinese USB C chargers and cables burning. Is it really that dangerous? Has anyone ever bricked a tablet with an USB c charger?

[nanachi]

I found 2 chargers

https://www.aliexpress.com/item/USB-C-charger/32747091667.html

 

https://www.banggood.com/BlitzWolf-BW-S10-30W-USB-Type-C-PD-QC30-Fast-Charger-EU-Adapter-With-Power3S-Tech-p-1196993.html

 

Would any of these work?

[nanachi]

Wylver wrote:

For charging over USB C you need a charger capable of PD (Power Delivery) specified at 14,5 or 15V at 2A or higher. Quick Charge is a Qualcom standard (mainly cellphone processors) and thus not compatible.

 

Are there any inexpensive chargers like that on aliexpress or gearbest? They don’t have to have fast charging. Also I’d need it to be inexpensive.

[nanachi]

I’m not sure but, the pens used in the cube mix are actually magnetic themselves. Using strong magnets might mess with their accuracy. The official 9$ case comes with a pen holder.

[nanachi]

I got a new one and it’s working, I’m typing this from my cube mix.  No drivers were required, so I guess I received broken keyboard previously.

Pins don’t really have to stick that tightly. Pins stick out a lot.

Thank you for your help!

[nanachi]

how to reset to the factory default calibration?

I sort of messed up mine while calibrating with a so-so a Samsung note pen.

[nanachi]

eljuggy wrote:

Hello, don’t really know what it could be … but maybe you can try the following : can you clean the copper contacts at the bottom of the tablet and also check the pin of the keyboard ? does the Caps Lock led lights up when you press it ? and the “lock touchpad” key led ? do you hear a sound (like a USB peripheral plugged in or out), when plugging or removing the keyboard ? When unpluggin my CDK09 I see a “PIH peripheral” that disappear from the “keyboard” group in Device Manager (3 “PIH peripheral” displayed instead of 4 – note that I translate from French). (Standard PS/2 is always displayed even when keyboard is off).

 

Hey, thanks for answering.

Caps Lock, doesn’t seem to work,

The lock touchpad key works.I did connect usb fan and it works

there’s no usb sound and no pih device in the Device Manager

 

Maybe… windows deleted drivers when updating during the 1st boot?

Or maybe shop sent me a keyboard for cube i7?

[Author]

Posts