They have cube i7 which is 350$, so they goes from x1 pro to x2, which is 380-400, now we see this change,that is really not good and maybe something in the future, that makes it 350$ tablet…
@Daniel, Yes, exactly! So, they begin to add adhesive to the tablets.It’s not good,because you need heat gun just to open it. This rare case,when next batches became worse…
We, on russian forum, discovered a little spot ~3x3mm size on the screen. It looks like a light spot and can be discovered when the screen is filled with white color. In regular use you hardly to see it. Please confirm it on pack fresh models or models that usedused for a while to investigate the reasons of it.Thank you!
In short – I used 0.4mm copper plate between CPU crystal and copper CPU socket with Colaboratory Liquid Metal pro thermo interface applied to contact crystal-copper plate and plate-socket. I covered CPU contact pins with anti conductive lacquer to prevent surprises from liquid metal. Than, I removed aluminium sticker from tablet cover and connected all silver conductive stickers in therms of electronic conductivity. I used thermo adhesive artctic silver to stick copper plate 0.2mm on tablet cover and than two copper plates 0.4 and 1mm on top of it to provide contact socket-tablet cover(arctic mx4 is between socket and cover).And I placed copper plate 0.4mm in the pit on CPU socket too.Nothing very hard but still a lot of work.
Greetings to everyone. I modified cooling system of the tablet and achieved 67 degrees max under stress tests load and 3d mark 06 score of 6350. So no throtling just tdp limit. I described the process here: http://4pda.ru/forum/index.php?showtopic=697581&st=140#entry45096304
Sorry, the link is in russian and it is the second part.
The first part is above, 2-3 pages earlier.
