Forum Replies Created
-
AuthorPosts
-
October 28, 2017 at 7:54 pm #74057
And mine broke down and I negotiated with bangood.com to buy another at a special price and they offered me a coupon with 40%
October 28, 2017 at 7:44 pm #74053After I “repaired” it to a local service, it does not work at all, it’s completely dead. Now I can sell it for components, because apart from the motherboard, the rest is good. I ordered the same table again but at a special price, thanks to the kind of banggood.com courtesy. This time I’ll be very careful when I’m going to make modding for heat transfer and just put a heat pad between the CPU heatsink and the back case of the tablet. Other information;It has screen with wacom technology and works with old stylus from laptop-tablet. I’ve tested with stylus from the HP Elitebook 2710p and the Fujitsu LifeBook T3010 and it works with pressure sensitivity. I attach two pictures with the motherboard, may interest somebody how it looks …
Attachments:
You must be logged in to view attached files.October 7, 2017 at 8:37 am #73120I tried I think all the possible variants … I think I did some sort of short on the motherboard, I do not know … I tried to buy a new motherboard, but they do not get parts. Even if it is my fault, banggood.com said I would try to repair it locally and they give me the money on the repair (if it is a resumable amount). All I want is to fix it, even only on my own money, because I used the tablet very short time and I’m sorry to throw it in the trash.
June 13, 2017 at 8:19 pm #68132It was the best version at that time. Now I can not pronounce myself because I’m not aware of the new releases … I sold it in the meantime because it did not have a good signal wifi.
November 10, 2016 at 1:08 pm #56682Try this maybe can help: Dear friend
Good day
1> can your tablet be charged? if your tablet can be charged,please charge it full, press the “power ” +”voice — ” buttons at the same time for 30 seconds.
2> if your tablet can not be charged,please change a new charger or a charge cable to have a try.
3>if the tablet can be charged,but,it can not be turn on, please pressing the power button three times quickly,
in succession, and then holding the power button down for ten seconds.If the tablet can be turn on, it is ok.
4>if the problems remain after that,please check it in your local repair store.
Hoping you can solve the problem soon.
Best regards.November 10, 2016 at 1:01 pm #56680Sorry, but I already sold tablet and do not remember if I made a copy of the BIOS. I did however a folder where I
saved some stuff about bios, but Teclast X80 Pro bios (one tablet about the same configuration). There may be in
that folder and bios of the tablet Jumper Ezpada Mini3.
Attachments:
You must be logged in to view attached files.October 3, 2016 at 6:15 pm #52597Do you have windows 32 bit on Ezpad 4S newer version with Intel Atom x5 Z8300? Can you make a backup BIOS? I need to use on my Ezpad Jumper Mini3 to try to get rid of the 64-bit Windows.
October 3, 2016 at 6:09 pm #52596Do you have windows 32 bit on Ezpad 4S ? Can you make a backup BIOS? I need to use on my Ezpad Jumper Mini3 to get rid of the 64-bit Windows.September 27, 2016 at 4:24 pm #51018On my Epad Mini 3: -enter in bios(hold power and volume up button), select “Administer secure boot” and enable “Erase all secure boot settings”, so I did. Make sure the “Secure boot database” is unlocked and “Secure boot status” is disabled Use program Rufus and choose GPT partition scheme for UEFI to make boot usb stick from windows iso.
September 24, 2016 at 8:54 am #50500Maybe someone is trying to put bios from Teclast X80 Pro…
September 18, 2016 at 6:22 pm #50116Yes, unfortunately original Windows 10 drivers are not compatible, do not want to install in Windows 8.1. Maybe another program like Driver Magician can find …
September 18, 2016 at 12:21 pm #50099X64 Windows 8.1 can be installed but are not compatible drivers.
September 18, 2016 at 9:48 am #50047Enter in bios(hold power and volume up button), select “Administer secure boot” and enable “Erase all secure boot settings”, so I did. Make sure the “Secure boot database” is unlocked and “Secure boot status” is disabled Use program Rufus and choose GPT partition scheme for UEFI to make boot usb stick from windows iso. https://justtorrentz.com/torrent/12199572/Windows_10_Pro_PIP_LITE_%5B64_bit%5D_-_AppzDam
September 18, 2016 at 8:24 am #50044So far I have installed on it Windows 10 Pro v.1511 En-us x64 July2016 and Windows 10 Pro PIP LITE [64 bit]. The tablet is move fast with LITE…But I want a Windows 32bit, 64bit in 2GB RAM is nonsense because only operating system occupies the entire memory.
-
AuthorPosts

