- SSD m.2 not recognized: ssd is recognized in BIOS and W10
- needs several boots to finally get the system up: NO
- does not copy the system right: don’t know
- I need a special driver: NO
- whatever your problem is: When installing a ssd it is recognized in w10 explorer, and the bios recognized the ssd. When altered the BIOS/Bootsequence it only starts up with mmc w10. When i format mmc and again alter the bios boot sequence so that ssd is first in line a get a blue screen which states that my computer needs repairing. When i install a w10 on the mmc memory the laptop functions ok.
Here is the info we need to:
…………………………………………………………………………………….
- Name and model number/name: Jumper EZbook 3 V4
- seller Aliexpress SSD, GearbestJumper
- Months and Year of order: august 2018
- Windows version 1803 (April 2018 Update)
- your bios date (versions number) like: BIOS V5 Date 11/06/2017 or BIOS V6 Date 12/05/2017, if you do not know the bios number just the date is fine.
- did you leave the original windows on it or was it updated before you tried to install the m.2: updated
- the m.2 card you tried and failed: Kingspec M.2 SSD 2242 120 GB
- the m.2 card you tried and had permanent success: None
- When i tried to format the mmc memory with diskpart it gives a error when i tried to change it (i think, can’t remember clearly, i am not accustomed to this program), but i could easily put w10 afterwards on it. Also my BIOS gives me different options everytime i get in the BIOS. MMC is often not seen, the SSD is most of the times visible, but when i select it the laptop still doesnt start up.I used Macrium reflect free to clone the mmc to the SSD which worked perfectly.
I will try more to recovereverything, i’m going to clone the ssd back tot the mmc now.
EDIT 1: in hardware/apparaatbeheer i can see the kingspec (NT-128) and another isseu: the controller foor PCI gegevensbeheer is missing, and i cant download it via Windows downloadcentre. Maybe it is a special firmware from the manufacturer of the Jumper book?
