Hi8 Pro Dual boot: Android won't wake up from sleep

[Vedran]

Password, as it is posted in a few places, is “en.chuwi.com”
Without quotes, of course. Good luck with flashing.

[Piotr]

test it for more then “some hours”, and test it on android only, then give a feedback

[Piotr]

CHUWI THIS BIOS IS OLDER THEN BEFORE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[jayp76]

mine seems now fine, too.
If chuwi also could make battery optimizations, i mean longer standby times, that would be nice.

[John Young]

Hi $tef,  did your  flashing on Android affect anything on Windows 10 os working properly ? Have you flashed Windows 10 too ?

[$tef]

John Young wrote:

Hi $tef, did your flashing on Android affect anything on Windows 10 os working properly ? Have you flashed Windows 10 too ?

Hi, my Windows works properly and i haven’t flashed it. When you flash Android make sure you’ve selected “update” in the Flash Tool if you don’t want to lose Windows.

Chuwi Hi8 Pro DualBoot
(Hi8 PQ32G221****3932)

[Víctor]

 

to help…….

http://forum.chuwi.com/forum.php?mod=redirect&goto=findpost&ptid=1157&pid=4465

Note:”Intel Platform Flash Tool Lite” program for your operating system if you are going to use Windows under the “32-bit” should be.This program “64-bit” does not support.

 

Assumptions:
You downloaded and installed Intel Platform Flash Tool 5.5.2.0 and all USB drivers are installed (google this, downloadable from Intel site)
You downloaded and extracted the latest Android version on your PC into a folder (Main page of this forum)

Update:
0) The tablet is NOT connected to PC
1) Boot to Android, and turn on OEM unlocking in developer settings
2) Turn off the tablet (not hard reset, normal switch off from menu)
3) Turn on the tablet, choose Android with Volume+, then immediately hold down Volume-. Not just push, hold until it boots. This way it will enter fastboot mode.
4) With volume buttons choose “restart bootloader”, then push on/off button to restart the tablet
5) Wait for it to restart
6) On PC the Intel flastool is running, you already chose one of the json files from the extracted Android files. Flash, or no erase; I did the “flash” version.
7) Plug in the tablet to the PC, Intel tool will recognize it. Hit start to flash, and let the magic happen.

[Andras Kenez]

What is the drobpox password for downloading improved ROM?

( I found it : en.chuwi.com)

[$tef]

Do i need to look at the kernel version or build number. I’ve never had a problem with waking up from sleep and i didn’t flash the new ROM.

You have to look at the build number, if you’ve the same text your tablet is already flashed with the new firmware

Chuwi Hi8 Pro DualBoot
(Hi8 PQ32G221****3932)

[omer]

$tef wrote:

omer wrote:

Do i need to look at the kernel version or build number. I’ve never had a problem with waking up from sleep and i didn’t flash the new ROM.

You have to look at the build number, if you’ve the same text your tablet is already flashed with the new firmware

Yours start with 05.05-2016, mine is 2 days earlier 03.05.2016. Anyways, tablet works nicely but my type-c cable is AWFUL. To connect to a pc i have to hold the cable at a certain angle or it connects and disconnects all the time. My charging times are really bad because of this as well.

Attachments:

You must be logged in to view attached files.

[Víctor]

I can not do flashing the update of Android on Windows 10 x64.
It is normal that?

[omer]

Víctor wrote:

I can not do flashing the update of Android on Windows 10 x64. It is normal that?

 

Flashing program requires 32 bit windows 7 if i’m not mistaken.

[Víctor]

omer wrote:

Víctor wrote:

I can not do flashing the update of Android on Windows 10 x64. It is normal that?

Flashing program requires 32 bit windows 7 if i’m not mistaken.

thanks, it seems to me my …
is there any other way?
from SD card, for example?

[$tef]

Víctor wrote:

thanks, it seems to me my … is there any other way? from SD card, for example?

I flashed android on windows 10 64 bit with no problems so I think should be compatible

Chuwi Hi8 Pro DualBoot
(Hi8 PQ32G221****3932)

[Víctor]

$tef wrote:

Víctor wrote:

thanks, it seems to me my … is there any other way? from SD card, for example?

I flashed android on windows 10 64 bit with no problems so I think should be compatible

I could indicate a link to the method I use?
Thank you

[Author]

Posts