NEWBI GUIDE TO INSTALL REMIX OS 2 ON CUBE IWORK 10

[brainvision]

I’m not alessio, btrw..

 

thanks for you reply.

yesterday I tried the latest Remix OS 3 and it boot and seemed to work, but I had issue with the touch screen too: basically it was totally inverted! I got to tap the right side of the screen to select something on the left! very weird experience 😀

the guys from Remix forum told me I could calibrate the touch screen, but I don’t know how..

[Gray]

Sorry about mistake with nick 🙁
I don’t know about calibration.
Try to replace libraries at:
/system/etc/firmware/
/system/etc/atoisp/
/system/vendor/firmware/
/system/usr/idc
/system/usr/icu

All xml in /system/etc/
And if it not work: /lib/hw/

[Eduardo]

Has anybody managed to get remix 3 get working on the i10? If so which is the download link?

Thks

[Matthew]

I found this via Cube’s forum. http://tieba.baidu.com/p/4500774866.

It’s a guide on how to get Remix OS 2.0 on the iWork10 (ported from the Teclast X98 Plus). User winsisixixi writes: “camera, Internet, Bluetooth, direction ….. all worked perfectly, thank you”. 

Combining that with Laura’s “The big thread of How-Tos” -> “Flashing a modified boot image (android)” seems to do the trick as far as I can conclude from translating the Chinese to English. In the thread at Baidu, there’s a link to a file called “Flash_tool_x98_PLUS_v1.1.rar” (http://pan.baidu.com/s/1i5Q1hIH) – not sure you need it, but check it out.

Can you test that please?

Remix 3.0 is based on Marshmallow, currently Cherry Trail only supports Lollipop.

[Noah]

I used the remix os from onda v10 and everything i tested works fine also touchscreen

[Author]

Posts