X80 PLUS Android OS Only (Solution)

[Adam]

Hello, how about the battery life ? Is the battery drain still high on standby ?

[omid]

Can this be used on Cube Iwork 8Air

[Leo]

Got mine running on ANDROID OS single and got the 25gb. Thanks to triple A’s (Allember, Awal & Alex) got this possible and now installed and playing my RR3 that needs almost 3gb drive space.

[omid]

Can this be used on Cube iWork 8 Air?????????

Can this be used on Cube iWork 8 Air?????????

[Allember]

Yes, you can use into your Cube IWork 8.

[wiwiz]

Just asking, would the procedure also Root the tablet and able me to install TWRP

Thanks

[John Bubenzer]

I followed the instructions and it worked just fine, but screen rotation doesnt work anymore.

I am using an X80 Pro (of course i used the right firmware for the Pro)

Anyone got an Idea?

 

[Tamdai]

John Bubenzer wrote:

I followed the instructions and it worked just fine, but screen rotation doesnt work anymore. I am using an X80 Pro (of course i used the right firmware for the Pro) Anyone got an Idea?

Was that real right firmware?

There are two firmwares for the Pro.

For E3E6 and E3E7.

Check it out at Tablet Information.

[John Bubenzer]

Thx for the reply!

 

Ok, that might actually be the problem. My tablet says E3E7 on the back, but i installed the E3E6 Firmware.

Problem is, Teclast download site doesn’t seem to know E3E7. I cannot find the correct firmware.

 

Edit:

Just found you post with the mega link to 1.07 files for E3E7. Thank you very much!

 

[Phil AS]

Hello,

Thanks for this great Tip ! Works like a charm…

But, no need to download Win10 section (6.45GB), just need Tools and Android section…

Very happy with my new “One OS”

Good luck for those who would like to ….

 

[Chaiyan]

Thank you for your instructions.

My X80 Plus is now working on android only with total space of 25.56 GB.

[yokese]

After following this method, could it be reverted to dual boot again flashing with the original ‘gpt.bin’ or another method?

 

[Awal Din]

Yes, @yokese… just change configuration from blank to recover

To flash windows 10 you need usb flash drive with format fat32 + otg hub with keyboard

Just copy all windows 10 firmware to the flash drive…

Tutorial you can search on another thread..

[yokese]

Awal Din wrote:

Yes, @yokese… just change configuration from blank to recover To flash windows 10 you need usb flash drive with format fat32 + otg hub with keyboard Just copy all windows 10 firmware to the flash drive… Tutorial you can search on another thread..

Ok, thank you

[Meister Edermeister]

Ist this tutorial for factory reset also working for x80 pro? Looks like no keyboard is needed. And it say flash with configuration “blank”.

[Guide] Teclast X16 Pro / Power – Factory Reset

[Author]

Posts