[Armindo Carvalho Ferreira]

One problem that is normal in Teclast:

The SSD M.2

The SSD used is the cheapest on the market.
It may have been a problem with the SSD.

Easily resolved by replacing it with a better one.

[Armindo Carvalho Ferreira]

Hello,

Did you solve the problem?

[Armindo Carvalho Ferreira]

Hello,

Did you solve the problem with the battery?

[Armindo Carvalho Ferreira]

Hello,

Did you disconnect the battery press the power button during 45 seconds?

That should work.

If not, try also disconnect the ssd, the display cable and press the power button during 45 seconds.

Sometimes is a cable that is causing the error.

In this situation if teclast turns on it will prompt for the disk.

Turn off the teclast, connect everything and it will turn on with no error.

[Armindo Carvalho Ferreira]

Try to disconnect the battery, the SSD and the display cable, then press the power button 45 seconds.

Mine wasn´t turning on and after disconnect  ssd and some cables, press the power button (45 seconds),  it worked.

When it turns on, it will prompt for the disc.

Turn off the Teclast, connect all.

After that it will turn on.

[Armindo Carvalho Ferreira]

Boas,

Pelo nome deves entender português.

Estive à procura no youtube e não encontrei videos.

Podes tentar o seguinte:

Tira a tampa do tablet e desliga a bateria.

Se a ligação da bateria estiver soldada é necessário dessoldar.

Antes de o fazer marca a disposiçao dos fios.

Depois carregas no botão para ligar durante 45 segundos.

Voltas a soldar a liga na disposiçao que estava.

E deve funcionar.

Se a ligação for uma ficha, basta desconetar a ficha, carregar o botão

para ligar durante 45 segundos e voltar a conetar a ficha e ligar o tablet.

[Armindo Carvalho Ferreira]

Hello Ronan.

After you disconnect the battery, you must press the power at least 40 seconds.

It saved my teclast F7.

I am using it now

[Author]

Posts