[Daan]

Try using Windows Update ? This way my touch Screen drivers installed from.

[Daan]

You will need Intel Phone Flash Tool + https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices .

This works for my Chuwi Hi10 to flash the Android Image.

For Windows, you might be able to use a USB Flash drive with a copy of Windows 10 Install.

 

 

[Daan]

Rai Chad wrote:

If this doesn’t work the SSD probably died.

 

Topicstarter could easily check that with a M.2 SATA to USB device and with CrystalDiskInfo.

I got rid of the stock SSD and got a 1tb mx500 from crucial.

[Daan]

Hi everyone,

 

 

Got a 1TB MX500 SSD from crucial today and did a fresh install of Windows 10 home today.

One thing i’ve found out is that the ssd gets quite warm when in use . I have seen around 55c degrees and that’s without heavy use.

 

Anyone experienced the same ? replaced the Teclast ssd, because it felt quite slow for me, all though it could reach 400-500mb/s in seq-read.

For people who wants to replace the internal M.2, NVME DOESN’T FIT AT ALL. Had a samsung one from my desktop and no fitting was possible. This sucks, because i always go for nvme as they are not much expensive anymore ( check aliepxress for Goldenfir nvme and their sata ssd) they use exact same controller and nand chips as crucial mx ssd’s.

 

Remove if double posted, can’t see it myself.

Attachments:

You must be logged in to view attached files.

[Daan]

Go to device manager and let it search for drivers online, it will work.

So it did for my X6 pro and found the touch driver online.

[Daan]

I have Anker powercore 26800PD and can confirm it works with the teclast x6 tablet. Had to buy a USB c pd charger separately for it also, which come to about €120 for the powerbank with charger.

 

Picture is with connected powerbank.

Attachments:

You must be logged in to view attached files.

[Author]

Posts