[Tony]

Firstly, I sent the faulty unit via the UK Official Distributor.

Although a thoroughly good job was done, it was probably not cost effective.

The link for the firmware and a description of how to do it is at the top of this thread.

Last line reads ‘Everything you need plus additional information can be downloaded’

Click on the RED ‘Here’.

It may be you wish to just buy a new one 🙁

Good Luck

[Tony]

hi, Unfortunately the problem with my iWork 11 was the main memory chip. It was sent to China and repaired.

It came back fully installed.

I have however, managed to fully clear and install my small Onda tablet.

The process may well be similar.

I attach the word document to provide guide lines only.

You will still need all the correct firmware files.

Good luck, I hope this helps.

Attachments:

You must be logged in to view attached files.

[Tony]

Many thanks for the switcher. It works perfectly on my Onda V80 Plus.

It uses the desktop shortcut fine.

All I need now is the switcher from Android 5.1 to Windows 10.

Can anyone help. Please

[Tony]

Hi Xuen

Many thanks for the work you have done.

I have several problems not unlike yourself with this tablet.

First, I cannot find 位Win10 64bit part 1 so I am unable to boot into windows as advised.

Looking for startup.nsh

Secondly, although I have changed the setting in System components to Windows 10, there is still a setting in Advanced Settings that says Android.

I cannot alter this and sometines the tablet still tries to boot into android.

Just to be clear, I am still at the stage where I appear not to have either operating system.

Any help you could give will be appreciated.

Be well

Tony

[Author]

Posts