[inhalt]

Hi all. A fresh installation of Windows 10 Home did it for me. No more freezing when plugged in. Besides, I didn’t even need to reinstall the drivers… Windows found them all.

[inhalt]

It is an excellent matte IPS display 🙂

[inhalt]

It is definitely IPS, the exact same panel as my old Tbook4. I’ve been using my 3L PRO for 3 weeks now and was quite surprised when I received my unit. I was expecting a TN panel as seen in some reviews of the 3L PRO and 3 PLUS. So I assume Jumper released a new and improved version of the 3L PRO just like they did with the 3 PRO…

I bought mine in GeekBuying, for the record. Cheers!

 

[inhalt]

Hi guys. I don’t  have my Z2 anymore, but I solved the problem by calibrating the battery (which is recommended to do every 2-3 months).

Follow these instructions on how to manually calibrate the battery:

How to Calibrate Your Laptop’s Battery For Accurate Battery Life Estimates

 

The Z2 has a battery calibration problem, so even when it shuts down when reaching the minimum battery level, DO NOT PLUG IT IN YET. Turn it back on and keep using it. You will notice the battery level will stay at ZERO for the following 2-3 hours. Then, when it shuts down for the second time, you may plug it in and charge it up to 100%.

 

Even though you may think the problem is sorted out after doing this, it’s more than likely to come up again. So keep recalibrating until the issue is finally solved or keep in mind that the measures are not real. If it shows 6000 – 7000mWh, you still have 3h of use at 0% after it shuts down for the 1st time.

 

IMPORTANT: Don’t mess with BIOS. You might brick your laptop.

[inhalt]

Hi, guys. You can disable the 2-finger gesture in Chrome by installing an extension called “No MouseWheel Zoom”:

https://chrome.google.com/webstore/detail/no-mousewheel-zoom/ckhlfagjncfmdieecfekjbpnnaekhlhd

After installing, go to extension settings and make sure that “allow access to file url’s” is checked. Then refresh Chrome.

[inhalt]

2nd batch

[inhalt]

I entered the BIOS and reverted the graphic settings to stock (as I had changed some parameters) and the battery % shows OK now.

The thing is I was only getting 5h of working time with a full charge (which made me think that battery life was really poor compared to my Voyo Vbook V3’s, which used to last up to 8h). So I have just installed BatteryBar and it shows the battery capacity is 7800mWh instead of 10800mWh!!!

 

Now I am not sure if this is some sort of system limitation or my Jumper’s battery is just defective. Any ideas? I have already written Gearbest about this.

Attachments:

You must be logged in to view attached files.

[inhalt]

I entered the BIOS to increase the GPU dedicated ram. I’m a bit of a noob here, so I hope I did it right. There’s a parameter in Video Configuration called “IGD – DVMI Pre-Allocated” which a swtiched from 32 to 256. Is that correct? Should I change something else?

[Author]

Posts