[Dominik]

Milosz wrote:

I did exactly like U recomendet. 1st stock ROM after V2 by Mirek… All working great….now it’s time to install windows- how to start instalation to avoid damage android? At the moment I got only one icon of android in dual boot screen? THX for all advice-following ur guidance I’m almost there

Download image WIN10 for K9C6 from techtablet site and just like valerima posts place on USB (FAT32, name WINPE) and restart tablet. Installation should start automaticly.

[Dominik]

valerima wrote:

hi, guys, i can report I have succeeded and now have dual boot-android and windows.

1. Miloszu- at first you have download Mirek’s rom 2.1 , but flash it Intel phone tool.
2. Choose Mirec json and “blank”configuration. If your tablet is not identified then in bios choose enable “DNX”and Android – not Windows. then connect tablet via Usb to PC and press start flash …
3. If you will succeed – you will see that windows disappeared. You have to reflash recovery image for K9c6.
4. 4 files about 2 GB each are located in Download section. Format USB flash to fat 32 name WINPE and copy all files there. Unrar all 4 files in USB.
5. Connect to tablet and start it. W10 installation will start.
6. Powodzenia!!!

Congratulations. I think its best way to get dualboot K9C3. Hope Milosz power up his tablet.

[Dominik]

Milosz wrote:

1. Sorry Dominik I was wrong. I thought my tab charging past last 4h. My charger was disconnect <noscript></noscript> “Stupid Idiot :)” You was right …after charge tablet was able to boot in DXN FASTBOOT…but still was not recognised by PC. I connected keyboard to USB hub and I get to BIOS. I set “android mode” and all should be fine. But me “stiupid idiot” after reboot I get dual boot screen choice and I click windows ( start loading but blue screen after that) and tablet death. Black screen constantly. No sings of life. But I know this is temporary (sick tab). This tablet is full of surprise, I never seen in my life such a crazy device. So I will try get back FASTBOOT mode when I back home after work …then what should I do to make right flash (flash phone tools )and choose ROM to flash? Mirek V1 (900mb) or V2 ( 500MB)????THX for sucrefice ur priceless time Dominik…I don’t know yet how I will pay U back

I would start with oryginal teclast rom to recreate partitions (i think it is blank mode). I dont know how Mireks roms behave in PhoneFlashTool. Remember that you lost all windows data and partition. Try to run tablet with power button as i write few posts earlier. Best luck.

[Dominik]

1. Try to press power button for about 20 sec. if not
2. Try to press power for 1-2 sec when teclast logo starts try to press power for 10-20sec.

It helped me to run after bad flash.

[Dominik]

Witam. Trochę osób z Polski i Litwy sobie sprowadziło ten tablet 🙂
Did You manage to install full android and windows?

[Dominik]

Milosz wrote:

THX Dominik. I will try wen I back home… I’m really appreciate for ur help . I gona let know how is going where U from Dominik?

Good luck for You. I walked that road few days ago.
Im from Poland, Pruszkow.:)

[Dominik]

So connect to charger and wait until it gets at least 50% loaded. Then press power and both volume buttons until teclst logo on and release power button (only power button). After few seconds You should be in DNX mode. You should start with flashing Teclast android with blank config (read forum sticky tread about getting K9C3 dualboot) to recreate partitions for android. Only after this You could flash Mireks rom as clean install.

[Dominik]

Milosz wrote:

Thx i did that and tablet was recognise <noscript></noscript> . I was able to run mirek flash tool but unfortenutle somthing went wron and I’m not able to even power on tablet …Looks like BRICK…eechchhh this device is so problematic…During flash i get this screen

Try to connect to charger and press power for 1 sec. Does You get a telcast logo and battery icon?

[Dominik]

valerima wrote:

hi,

if you have k9c3 with dual bios and have windows only, but no android yet, how you make it recognizable, android is boot option only , but no this OS…How?

I dont think you can flash Mireks rom using Mireks tool as first after getting K9c3 dual boot. First one You have to flash rom using PhoneFashTool to get all partitions (As blank i think, You lost all windows data).
To get DNXmode recognize try go into mode via BIOS: http://techtablets.com/forum/topic/tool-for-bios-update_-k9c3_-afuwin/page/2/#post-20162

Everything about getting K9C3 dual boot is in here: http://techtablets.com/forum/topic/how-to-dualboot-androidwindows-on-k9c3/

[Dominik]

Milosz wrote:

Guys I got another problem. After bios update i going to DNX MODE to flash Mirek ROM. But PC don’t recognise tablet…nothing happen. I installed all this 3 driver ,iSocUSB Drive, IntelAndroidDrive, PhoneFlashTool but no results. I did test on laptop also same think. Phone flash tool don’t see device- Mirek flash tool give me (waiting for device)…Any idea? THX

Try going to DNX mode via BIOS from Windows (Robert explains how: http://techtablets.com/forum/topic/how-to-dualboot-androidwindows-on-k9c3/#post-12396).
Select DNX mode in BIOS and save&restart.
If that doesnt work try to change select OS in BIOS to Android and then go to DNX BIOS.

[Dominik]

Good to hear You managed to do this without problem. 🙂

[Dominik]

Milosz wrote:

THX for answer. One more questions FTPW.EXE is a program for me to download or this is a biuld in system tool?

“information means that you do not run program (ftpw.exe)” how to run this program??? Where to find ? From download section is only BIOS.bin and teclast tool for BIOS update….

Can U please give me link to this ftpw.exe flash tool…thx

But teclast tool for Bios contains ftwp.exe. Here is link for extracted files: https://drive.google.com/file/d/0B7aaZbWjE-mEYlM2SFZaWmdSOEE/view?usp=sharing
or You can extract it by yourself from X98Pro-V1.00V1.05.exe using 7zip (right click and extract).

[Dominik]

Milosz wrote:

Guys please HOW TO FLASH THIS BIOS???? i got (No teclast Pad, newest version bios installed). With ftpw.exe nothing happen. I got bios.bin file on C: drive …when i run comand prompt as admin and type fptw.exe -F bios.bin -BIOS or fptw.exe -F bios.bin or fptw64.exe -F bios.bin -BIOS i get massege ” ftpw.exe is not recognized as internal or external command…. How to update Bios ? I got x98PRO propably K9C3 (only windows 64Gb)

This information means that you do not run program (ftpw.exe) from it folder or you didn’t define path to ftpw.exe. The command should look like this:
<path1>/ftpw.exe -f <path2>/bios.bin -BIOS where <path1> is path where file ftpw.exe is stored and <path2> is place when bios.bin is stored.
The simplest method to do is to place both bios.bin and ftpw.exe in c:\ folder and execute from there (of course using command prompt as admin). But remember You do it at your own risk.

[Dominik]

mirek wrote:

updated to v 2.0

Thanks Mirek for Your great work. I’ve flashed v2 but there is two things i’d find.
1. File system5.img (rom folder) should be renamed to system.img to flash properly.
2. No change in build number (its still mirek190_v1 after flash, i did clean flash).

[Dominik]

Maybe try to update to newest Windows. On start I get huge update to 1511.

Its odd. On some tablets work basic flashing program, on some only manual (ftpw.exe) on some none. Maybe bios chip is different.

[Author]

Posts