X98_PRO_android_5.1_mirek190_v6.0 rom

X98_PRO_android_5.1_mirek190_v6.0 rom

TechTablets Forums Teclast Forums X98 Pro Forum X98_PRO_android_5.1_mirek190_v6.0 rom

Tagged: 

  • This topic is empty.
Viewing 15 posts - 91 through 105 (of 989 total)
  • Author
    Posts
  • #19611
    mooms
    Participant
    • Posts: 58

    probably cooper MODE ….I think to start convert my K9C3 to dual boot and test this ROM but I’m afraid of brick this poor tab…plenty of BIOS update problems etc….

     

    No copper mod on mine, not used clean master or other task manager/killer, just installed Antutu 6 after a fresh boot, and scored 81K

    I have also removed Chrome and YouTube from system and installed Nova Launcher.

    #19620
    mirek
    Participant
    • Posts: 178

    Hello everone

     

    tomorrow  I release v2 rom

     

    changes like

    • removed chrome
    • added stock browser from aosp rom – much lighter ( at the moment we have only 2 GB of ram available in android … )
    • enabled zRam 600 MB – sappiness to 100 – I checked and ratio is usually between 30 – 60 % not bad )
    • ksm – checking pages 500 – to save battery – increasing free ram
    • adaway added and updated

    At the moment multitasking is muuuch better but still if we had access to 4 GB of ram …

    In the next version I want to configure scheduler and io as well

    #19624
    robert wisdom
    Participant
    • Posts: 37

    Hey mirek, been running your ROM. Works great. Thanks. I made all the adjustments in pimpmyrom. I took the out stock “heatsink” and took out a cooper heat pipe heat sink from an old laptop CPU cooler. Took a hammer to it to make it as thin as possible and removed the fins and the fan. Put some artic silver on it and the memory (put some little copper shims on them). Took out the copper lining glued to the back case of an old nexus 7 and stuck it to the back case of my x98. Took some electrical tape and protected all the little components near the copper heat pipe that is now running up past the power button.  Running “performance” in the power options in windows and scored a 870 on the same performance test as the dude on YouTube who did the cooling mod on his x98 pro and he scored a 760.  Ran antutu after setting the mode to performance in kernel auiditor. Scored 86000! And its not even getting hot at all!

    Only reason I did this is because yesterday, I put the tab down, but left it on, and picked it back up from the back of it (metal side) after an hour  (it was face up on the carpet), and it a just about burned the palm of my hand it was so freaking hot! Here’s a screen shot of antutu. Ess system manager says i have 3gb ram, not 4, but oh well.

    I can’t wait for your next rom mirek, you rock dude. I put you rom on the first day i got this and it was so easy. Then i put the latest insider build of windows 10 x64 and wiped whatever was on it before.  I have chrome, chrome beta, and chrome dev installed and just about every google app made.  I just kill them from starting up with android with the ess task manager. Anyway, later peeps.

    Update, updated to the latest Mirek.  I’m up to 86.6 on antutu, not too bad.  Heat issues are gone and battery life is better.  Doesn’t beat my Dell Venue 11, I got off ebay for $225, core i5, 4gb ram, 128 ssd.  I put android x86 6.0.1 and get 220000 on antutu.  That’s running the latest 12/26 iso natively.

    Update my Dell Venue 11 to k3 kernel of android x86 6.0.1, running off a flash drive, installed through rufus 2.6.

    Attachments:
    You must be logged in to view attached files.
    #19635
    balordo
    Participant
    • Posts: 3

    Hello everone tomorrow I release v2 rom changes like

    • removed chrome
    • added stock browser from aosp rom – much lighter ( at the moment we have only 2 GB of ram available in android … )
    • enabled zRam 600 MB – sappiness to 100 – I checked and ratio is usually between 30 – 60 % not bad )
    • ksm – checking pages 500 – to save battery – increasing free ram
    • adaway added and updated

    At the moment multitasking is muuuch better but still if we had access to 4 GB of ram … In the next version I want to configure scheduler and io as well

    i can install it without erase win 10, is there a guide step by step?

    #19702
    fioren
    Participant
    • Posts: 5

    Mirek has given instructions on page one. have a look step by step. Great rom by the way. Mirek would still love  to see this as a straight android device, I know I see people just want windows but Android works great here. Can you put a third option on your installer to wipe windows and just install android? looking forward to v2

    #19728
    mirek
    Participant
    • Posts: 178

    I improved scheduler drastically !

    Look on cpu spy while browsing internet  🙂 only 8 % cpu on the highest speed instead of 50 % like before …

    No more hotness and device works much longer !

    Attachments:
    You must be logged in to view attached files.
    #19764
    mirek
    Participant
    • Posts: 178

    updated to v 2.0

    #19766
    Hualalai
    Participant
    • Posts: 126

    You do wonderful work, Mirek.  I’m surprised the Googleplex hasn’t sent a tractor beam your way.  🙂   Your ROM, esp. performance improvements like tuning the scheduler… that could be a Ph.D. dissertation.  I know of at least two dissertations about algorithms for schedulers.

    #19776
    fioren
    Participant
    • Posts: 5

    Awesome

    #19781
    Dominik
    Participant
    • Posts: 20

    updated to v 2.0

    Thanks Mirek for Your great work. I’ve flashed v2 but there is two things i’d find.
    1. File system5.img (rom folder) should be renamed to system.img to flash properly.
    2. No change in build number (its still mirek190_v1 after flash, i did clean flash).

    #19792
    David
    Participant
    • Posts: 1

    Yes,  I flash v2 and really it is the v1 because the rom have Chrome and the build number is mirek190_v1

    #19793
    mirek
    Participant
    • Posts: 178

    Thanks – Corrected !

    #19812
    Al Simmons
    Participant
    • Posts: 6

    AHHHHHHHHHHHH! guys pls help me! MIREK pls help us . my tablet recognize only 32gb micro sd. 64 microsdxc and 128gb are only seen in windows …. so upset because of this :((( otherwise woul be a great tablet

    #19813
    Al Simmons
    Participant
    • Posts: 6

    I’m gonna hug u if u help us 🙂

    #19815
    hammondb4
    Participant
    • Posts: 3

    At the moment multitasking is muuuch better but still if we had access to 4 GB of ram … In the next version I want to configure scheduler and io as well

    Is this a limitation of your rom? Because in stock rom in my tablet task manager shows 4gb of ram….

Viewing 15 posts - 91 through 105 (of 989 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar