Forum Replies Created
-
AuthorPosts
-
August 18, 2016 at 9:09 am #47201
what about teclast tbook 10
August 16, 2016 at 5:24 am #46969I have never experienced this error
August 15, 2016 at 2:15 am #46851congratulations for having remix working after all of this.. I hope it deserves this adventure.. what is working/not working with remix if I may ask
August 15, 2016 at 2:12 am #46850deeply sorry man.. it is my fault.. I tried this blank configuration only once before.. and that time I had no windows partition before flashing.. this why I couldn’t see its effect in Windows.. I used Intel Flash tool with “update” configuration thousands of time and it never touched windows – but in the same time “update” configuration will not fix non booting android.
August 14, 2016 at 7:27 pm #46837you need to install it from the beginning
August 14, 2016 at 6:52 pm #46833download the file I shared previously “7 gb file”.. it contains the stock windows for type c.. then follow the guide attached.
after you download I will tell how to prepare usb 1 and usb 2
Attachments:
You must be logged in to view attached files.August 14, 2016 at 6:47 pm #46831unfortunately windows gone.. there is guide to restore it in this forum but I appreciate if you don’t want my help anymore
<hr />
August 14, 2016 at 6:26 pm #46828sorry man.. I figured out what is wrong.. the configuration should be recover not blank.. it is completely my fault
August 14, 2016 at 6:23 pm #46827dear..
I don’t know what, did you exactly do?
Intel Flash tool DOESN’T AFFECT WINDOWS IN ANY WAY..
anyhow it is very obvious that the damage caused by this thread is way more than it will help.. I am going to delete it.. but I am available in private messages to offer any help..which I can understand if you don’t want any more
deeply sorry
August 14, 2016 at 5:53 pm #46824you can enter it from recovery
August 14, 2016 at 5:53 pm #46823fastboot mode
August 14, 2016 at 5:44 pm #46820But the steps are incomplete now again. If I flash them with the Intel tool, then wouldn’t that mean the modified boot.img is also overwritten again, and data isn’t ext4 anymore? So what ware the correct steps now…
flashing the stock rom will correct data partition problem.
yes it will overwrite the modified boot.img but that is not a problem.. when you flash remix system.img, remix os will boot out of the box.
at least this what happened with me.
but be sure to select “blank” at configuration tab.
August 14, 2016 at 5:53 am #46779my data partition is unknown because this photo was taken when my device was already bricked.. if you want new image I will take.
August 14, 2016 at 5:51 am #46778Why can’t I flash this with adb tools? What will the Intel tool do… will it touch Windows partitions? Will It change the boot loader and render Windows unbootable? Because I don’t have the original boot order anymore of the Windows partitions… If your data is ext4 why does it show as unknown in your gparted picture? Thx for uploading those though I will try it tomorrow. Though I still would like to know why TWRP not working and Remix OS too.
firstly Intel flash tool will not touch Windows.. it is the official tool used by cube and other manufacturers to install android in the first place..
the difference between Intel tool and adb.. is that Intel can flash all android partitions with just one click.. in adb you can only flash one partition at time as far as I know.
you can flash just system. img from stock rom with abd.. if android boot successfully please do full back up with either twrp or titanium backup and then proceed to below if you still want remix os.
flash stock rom using the Intel tool with above mentioned method “using flash.jason file and blank configuration”.. after reboot your android should be like stock with no apps except stock bloatware.. then you flash remix system.img using adb then reboot into android.
August 14, 2016 at 1:34 am #46771Intel Phone Flash Tool Lite
https://01.org/android-ia/downloads/intel-platform-flash-tool-litecube Iwork10 type c stock android image
https://mega.nz/#!rh0DxYZQ!NgSRmPWsYi7WG7G0Y8oV1j0yPqPmB3Lj3WLflf-IdDQmy data partition is ext4
to flash stock image.. unback the file.. open intel flash tool.. click on browse>> go to unpacked folder>>android and select file “flash.json”.. then go to configuration and select “blank” then select start to flash
-
AuthorPosts

