Forum Replies Created
-
AuthorPosts
-
September 20, 2016 at 8:31 am #50216
Thank you very much Jonathan!
Your TWRP fix brought my usb ports back to life after me flicking the wrong setting in the bios.
Wish i had read this thread before taking the thing apart looking for a clrcmos jumper.
I owe you a beer or two mate, cheers!
November 24, 2015 at 6:59 am #16518My serial is the same as Phillips.
The link for installation guide is in the first post of this thread.
If anyone has the same problem as felix while following the guide, when the tablet goes in to DMX mode, go in to device manager and check the HID of the android device (right click android device, properties, details tab, hardware ID), write it down, disconnect the tablet from the pc, power the tablet down, change the setting in MFT software, click apply, close the software and start the whole proceedure again.
If you are installing the windows software as well, remember to put the image files inside a folder called images on the 2nd usb stick or you get this error (“Fail to make w:\recycler\scratch directory”) and have to start from the beginning (install android again).
It was frustrating but my tablet is now up and running with both android and windows working.
November 23, 2015 at 9:57 am #16427I’m not sure my issue was the same as your issue.
I installed the blur fix for android and it stopped my touchscreen from working.
My touchscreen still worked fine in windows 8 but the blur fix had broken something in android.
I only reinstalled android and that is as far as i went, because at the moment i have no intention of upgrading to windows 10.
Windows 8 does what i need it to do so there is no real need (aside from hype) for me to upgrade.
November 23, 2015 at 5:14 am #16416Was just about to post for help when i figured it out.
Thanks Phillip, i was in the same boat as steve, i went ahead and installed the blur fix without realising i didnt need it and it broke the touchscreen in Android.
I could not for the life of me find a harware id in device manager for the SOC so i just used the value mentioned in the guide.
It took me a couple of turns to realise i had to check device manager and grab the android id when i got to the same screen felix was stuck on.
A quick change to the settings in MFT and start the entire proceedure again came up trumps.All in all it turned out well, now i can load up all the android games i have amassed through humble bundle and have a bit of fun.
Cheers fella.
-
AuthorPosts

