powerdedo

powerdedo

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Teclast x16 Power – format and install Windows 10 Pro #21264
    powerdedo
    Participant
    • Posts: 6

    i dont think that android is good for this tablet. i mainly use it for work, so need all windows features only.

    in reply to: Undecided about the x16 power – everyone happy?! #21261
    powerdedo
    Participant
    • Posts: 6

    probably they have some different versions/batches of this tablet.
    but anyway after cleanup and fresh windows installation it runs very smooth and no issues with temperature.

    the only problem left – charger. i dont know what they smoke. add 5V 2A DC pin-plug instead of another microUSB socket. this was definitely the biggest engineering mistake.

    i hope they got our message , and next batch will have USB charger.

    in reply to: Teclast X16 Pro / Power – Common Issues & Fixes #21195
    powerdedo
    Participant
    • Posts: 6

    as an engineer i will definitely reinstall proper windows. we have tested x16 Power with stock dual rom, and then formatted everything and installed only windows pro. and in fact all bugs and issues just gone. working 12 hours without charging in eco mode. i would say nice hardware design.
    so it only the software team just screwed everything. they made such a terrible software customization.
    but the only problem left with charging adapter and plug, it is so fragile and dodgy. you can easily break it. but it can be fixed later, we found it can be easily re-soldered to microUSB socket instead of that pin charger. also there is no led indicator to see power-on/sleep/charging.

    in reply to: X16 Power – Boot to USB #21112
    powerdedo
    Participant
    • Posts: 6

    you dont have to boot to USB, if you want to reinstall fresh windows, in case if you dont see usb drive enable in BIOS fast boot with usb full availability,

    then go to windows ->settings -> recovery

    and press restart

    it will load then engineering menu, what i did just press Command Prompt

    after entering your account password and entering to command prompt you can plug in USB, enter its letter and type setup.exe

     

Viewing 4 posts - 1 through 4 (of 4 total)

Lost Password

Skip to toolbar