Forum Replies Created
-
AuthorPosts
-
Does this TWRP works also for A6C9? (x98 plus 3g)
Yes, I have a A6C9 (x98 plus 3g) . I’ve also tried with A6C7 my mother, all right.
SuperSU automatically updated itself and now I get error while Updating binaries. It just tells me to reboot my device and try again but that doesn’t help. Any advice? I already uninstalled updates for the SuperSU but I still get the same error. I’m using the “normal” updated method since there is no twrp recovery?
If there TWRP the X98 Plus.
I attach an installer for the TWRP, I created based on the Flash Mirek Tools.
https://mega.nz/#!C4JXjIJC!8xJGFdMt8Owwy8aIDgtcx98jqcDY9GCmVDNKnHaEUUk
That knows only has an error, when you leave the TWRP menu selection in the touch is reversed. Only when leaving the TWRP, then it is working properly.
I installed the last SuperSU with TWRP and all perfect.
Hi Mirek my android was working until I changed language to arabic and now it keeps tell me it cannot work android. I have downloaded the file you posted for tablet X98 Plus on my pc. Can you tell me how to load file to tablet?. My windows side on tablwt works fine only android is messed up..Thanks, Sam android> Thanks
If you do a CLEAN INSTALL (option 2) will surely solve the problem. On the first page it is explained how to do it.
Only installs android again, windows remains intact.
June 16, 2016 at 4:50 pm in reply to: New Firmware X98 Plus 3G (A6C9)-双系统-Android5.1-V1.04版固件 #41189In this post I put a link to download from Mega:
http://techtablets.com/forum/topic/x98_plus_android_5-1_mirek190_v1-0-rom/page/23/#post-40004
Install Mirek ROM:
http://techtablets.com/forum/topic/x98_plus_android_5-1_mirek190_v1-0-rom/
I have A6C9, I’ve upgraded the firmware to the latest a week ago, everything went fine (the upgrade process has two parts, each after a reboot, so there’ll be three reboots in total), so I assume the firmware upgrade on A6C9 is safe – anybody else who had succeeded on this variant?
A6C9 has a new BIOS, which version?
You do not have to enter the web driversfordownload. At the end of the post there is a Attachments with drivers.
http://techtablets.com/wp-content/uploads/2016/02/sdbus.inf_amd64_509acf961ce0c619.zip
Do you know which version of Windows SD card drivers I need?
Those who are at the end of the post I linked you, I use those. Attached image.
Remember to disable Driver Signature feature of Windows. Follow the instructions that post.
Attachments:
You must be logged in to view attached files.After the Mirek upgrade, I stiil have a dual boot functionality and am asked which OS I would like to boot to. The location function in Android never worked on mine prior to the Mirek upgrade. Apparently my model X98 Plus 3G (A6C9) does not have GPS, and can only use locate services via network services. I use a separate Bluetooth GPS receiver which is accurate to within 2M. In android I can use an NTFS formatted 64GB sd card which I have full of films and videos. However, Windows will not see any SD cards at all. Not Mireks fault, something to do with a windows update that took place! Not entirely bothered though, as I use the online Microsoft OneDrive for storage in Windows. The ability to read SD cards in windows would be nice, but not essential.
The GPS location is an error Teclast official version V1.03, I do not know if the latest version V1.04 is solved.
If you install these drivers on windows you can read the card on windows, reading speed is lower, but it works, I spend the same.
http://techtablets.com/forum/topic/x98-plus-trickstips/page/7/#post-25100@mirek190, a new version V1.04_20160408 for A6C9, if you could make a version of your ROM with this version you appreciate it all.
Changes according to readme.txt:
V1.04版改善内容：
1、修复选择阿拉伯语会报错的问题；
2、添加intel关于此平台最新的Patch，优化及提升系统稳定性和兼容性；
—————————————————————————————
X98 Plus 3G (A6C9)-双系统-Android5.1-V1.03版固件：首版本发布；
English:
V1.04 version Improvement:
1, select Arabic repair will complain of problems;
2, add intel on this platform, the latest Patch, optimize and enhance system stability and compatibility;
————————————————– ————————————-
X98 Plus 3G (A6C9) – Dual System -Android5.1-V1.03 firmware version: first release;
MEGA download link: https://mega.nz/#!m9ZBQb5Q!eirna9y5Hb0g6cUGjFVSHpKuqAKmTAKI6Lg54b_SQYc
Thanks for your work.
Edit: I know you’re busy, when you have time if you can you really appreciate. Thank you!
I installed V3 in my x98 plus 3g. When i lock the tablet, them i cant unlock it, the display not turn on. I need to press power button a few seconds and turn on it again. Help please. I done a clean install. Thanks mirek!!
Its imposible use the tablet in Android with this problem. I cant do anithing, i have reinstaled Android Rom v3.0 again and it works fine the first hours, then if you lock the tablet, you cant unlock. You must force power off and turn it again 2 mins after. Can you help me? Thanks A6C9 X98 Plus 3G
I had the same problem, disable the automatic update of Google Play. The tablet is frozen when applications are updated.
I did not have this problem again.
Hi Mirek,
Is possible to install Xposed on this tablet?
I tried, but causes bootloop.Thanks for the work.
I have made a new clean install. Bluetooth now works correctly.
Thanks to the work MirekYes, I clean install.
The bluetooth runs, but does not find any device, keyboard, mouse, mobile android.
But he found a Windows PC.This means that work but can not find some devices.
See if others got the same problem.
-
AuthorPosts
