[Michał Kotula]

OK, so after 1 week of using android (I didn’t flash windows 10 at all) I’ve some issues with the stability. Sometimes the tablet will just freeze, and hard reset is required. There are no “triggers” for this. Before on Windows 10 it was running fine for days, so I don’t suspect a hardware thing. Does the Windows 10 flashing part has to do anything to do with android part?

Also, is there a way to flas this tablet to be android only?

[Michał Kotula]

Miroslav Sačer wrote:

can somebody help, how to download new firmware dual boot for the ultimate iwork8 its all on chaneese

Update 4: Android is working. Initially a little unstable, but after OTA and factory reset everything is working smooth. Couldn’t install Win10, as my 32GB pendrive is not seen by the tablet during bios boot. Android takes 8GB of storage for apps.

Update 3: Flashed Android (put content of the android folder (Chinese chars one) to root of the USB. Go to BIOS (hold vol+ at boot) then to save&exit tab and select “boot from EFI” (2nd to the bottom option). Script worked for about 3 minutes. After reboot I selected android and android service menu showed up (green guy with open belly). This one worked for about 10 minutes. Next is Win 10.

Update 2: Flashed BIOS from within Windows (just run the bat file) – script worked for about 2 minutes, rebooted the machine. Android is working. So far so good…

Update: Dual boot files are in Techtablets.com download section. Download is from google drive and filesize is ~8GB.

So, the released firmware can be found here (in chinese, Baidou account needed):

http://www.51cube.com/ch/DownShow.asp?ID=395

I have no expirience with flashing cube tablets, so I will wait for somebody to post instructions (I can test thou).

[Author]

Posts