[Jøran]

I have the same problem as well:/

[Jøran]

Well mine is dead as well :/ I’ve tried to flash it with my raspberry pi, but it doesn’t recognize the chip. did any of you had that problem?

I did use an logic level converter, however i had some problems finding 1.8v supply, but found a small resistor on the rpi which gave out 1.8v, so i soldered it onto that one.

Now i don’t know what to do, lol 😛

[Jøran]

Did you flash the 608 bios or the 607?

[Jøran]

I fixed the official case screen off problem. Just took a Sharp knife and made a cross just over the magnet from the inside, then gently took it out. Now i just filled the empty Space with glue, and gently pressed the cross together. Now ofc it won’t turn off the screen when closed. But at least I can use the case 🙂

[Jøran]

Thx Chris! Flashed it yesterday actually, but figured i could post that it worked for me if someone was sceptical!;)

[Jøran]

Fixed my flickering! Sweet 🙂

[Jøran]

latest bios fixes my issue!!!☺ i’m starting to like this tablet!:)

[Jøran]

no there isn’t a free way, but i had an extra license so thought why not:p btw, is anyone else having system and compressed memory high cpu use?

[Jøran]

Try to reinstall using the guide in the Bios update thread. Worked for me after i fucked up my install ^^

[Jøran]

Working okay for me, has some flickering sometimes when exiting from sleep, else all is fine.

Battery time is pretty good, however i have this system and compressed memory process running which eats up a lot of CPU, and thereby decreasing battery time, and heating up the CPU.  However this isn’t limited to the chuwi, but also the surface pro, some laptops, stationary pc’s etc.

Also i upgraded to windows 10 pro, which works awesome! 🙂

[Author]

Posts