Forum Replies Created
-
Teclast X16 Pro / Power – Factory Reset As it is a real pain to find and download the files and understand the chinese instructions, I thought I reupload some of them and publish a simplified version of the official chinese guide. So here it is, a step by step guide on how to reset your X16 Pro tablet. It probably also works with the power version, but I didn’t test it. – German guide: [Anleitung] Teclast X16 Pro – Factory Reset Be warned! By resetting to factory settings everything on your tablet will be deleted! Backup important data first! Do it on your own risk! I dont take any responsiblility for harming your device!
- 1. Download needed files (reupload; source) – drivers and software – Android firmware – Windows files (split into 4 parts) – Also you need: 1 (more) Windows computer, 1 USB-drive (at least 8GB) and about 30min of your time.
- 3. Install drivers and software Unzip and install in this order with recommend settings. 1. iSocUSB-Driver-Setup-1.2.0.exe 2. IntelAndroidDrvSetup1.5.0.exe 3. PhoneFlashTool_5.3.2.0_win32.exe
- 4. Format tablet and install windows Unzip Android_Firmware.7z and move it to your C:\ drive. Afterwards open Intel Phone Flash Tool, click on “Browse” and open “flash.json” from the unzipped folder. Select “blank” configuration. Now start android and shut it down again. Then press and hold the power and volume down button simultaneously until “DNX FASTBOOT MODE…” appears on screen. Now connect your tablet with your pc. The Intel flash tool should now list your teclast tablet. Take a deep breath and hit the “Start to Flash” button next to the tablet icon. Now the tablet is going to be formatted and android going to be installed. After the process is done your device is going to reboot and your can savely disconnect your tablet from your pc. If everything went alright, you now have android installed on your tablet. If you dont need windows, you can skip the next few steps.
- 5. Install windows Preparation: To install windows you need a USB thumb drive with at least 8 GB of storage. You now want to format that usb drive with the name “WINPE” and “FAT-32”. That is the only way it is going to be recognized! Now we unzip our Windows files and move the content of the folder called “X16-（双系统）_Win10系统-安装文件 (images+winpe)” onto the usb stick. Installation: Shutdown your tablet and insert the usb thumb drive. After that boot your tablet and select the windows logo in the boot selection screen and hit ok. Everything else is done automatically and after a while the tablet is going to reboot. If it is not rebooting but the message “Operation Successfull” appears, you want to manually shutdown the tablet by holding the power button for about 10 seconds. After that you can remove the usb drive and boot windows from the os selectin screen. Drivers are installed automatically, even the little program for booting into android again.
- 6. Done! If everything went fine, your tablet is now reset to factory conditions. But this also means the language was set back to chinese. In android you can simply change the language to english via the system settings. (first option in language settings) Windows can be set to english on first boot or in system settings as well.
I hope someone could benefit from this little guide!
Files source + chinese guide: http://pan.baidu.com/s/1sj5ovi1) - stick. Installation: Shutdown your tablet and insert the usb thumb drive. After that boot your tablet and select the windows logo in the boot selection screen and hit ok. Everything else is done automatically and after a while the tablet is going to reboot. If it is not rebooting but the message “Operation Successfull” appears, you want to manually shutdown the tablet by holding the power button for about 10 seconds. After that you can remove the usb drive and boot windows from the os selectin screen. Drivers are installed automatically, even the little program for booting into android again.
- 6. Done! If everything went fine, your tablet is now reset to factory conditions. But this also means the language was set back to chinese. In android you can simply change the language to english via the system settings. (first option in language settings) Windows can be set to english on first boot or in system settings as well.
I hope someone could benefit from this little guide! ? Files source + chinese guide: http://pan.baidu.com/s/1sj5ovi1) [/quote]
Hello I’m Italian. I have a Teclast x16 pro. A few days ago I upgraded to Windows 10 10586.104 version. I had problems and I had to reset the tablet, but I had a problem in the installation of windows after formatting: the Windows installation is stuck at 46%, and the installation of 73% drivers. After three hours that I was blocked off and restarted, but the Tablet it signaled that lacked the operating system. In the end I managed to make another recovery but failed to return to the version of Windows 10 Original Teclast but 10586,104 version and many things do not work because they lack drivers.
So I wanted to go back and I tried following your guide from step 5 (Windows only because I need Android works well), I prepared USB drive, but when I turn on the tablet with USB drive inserted nothing happens. How can I do to return to Windows 10 Original Teclast? Can you create an image (.ISO) file of your files to restore from UEFI? Or could you tell me how to manually install all dirvers? I hope for your help because I’m desperate.
