TechTablets › Forums › Jumper Discussion › EZBook series › EZbook 3 Pro – How to unlock the BIOS
- This topic has 531 replies, 118 voices, and was last updated 4 months, 4 weeks ago by SAW.
-
AuthorPosts
-
February 9, 2018 at 1:34 pm #79185
So just download the unlocked BIOS from the first post and then go to the 2.5 point of the tutorial
EZbook 3 Pro BIOS modder - find my work here
If you want to tag me, my username is thegiollyFebruary 9, 2018 at 3:08 pm #79187Ok thanks. I’ll try in another way to install ubuntu first .. if this does not start then I will flash the bios.
Another question .. if I flash the bios and unlock it .. if I format the PC in the future I lose the new settings (unlock bios)?
February 9, 2018 at 3:11 pm #79188No, the BIOS doesn’t chnage if you format the PC
EZbook 3 Pro BIOS modder - find my work here
If you want to tag me, my username is thegiollyFebruary 9, 2018 at 4:16 pm #79189But on the other hand there is the possibility of brick the pc. am I right? Is it highly dangerous to do this for an amateur like me, or are there a good chance of success? Do you advise me to proceed? Thanks again
February 9, 2018 at 4:18 pm #79190Hi Valerio @house044
Had the same issue when trying to install Linux (only Manjaro worked out of the box for me).This guide worked perfectly:
https://thanhsiang.org/faqing/node/221
I installed Xubuntu 16.04.3, excellent performance!https://de.wikipedia.org/wiki/Ernst_Kuzorra
February 9, 2018 at 5:30 pm #79191February 9, 2018 at 7:44 pm #79193@painmaker-202
Have you noticed any difference in your version?
This is the unlocked one, please try and let me know if it works.
http://www45.zippyshare.com/v/QQsbMEaO/file.htmlEZbook 3 Pro BIOS modder - find my work here
If you want to tag me, my username is thegiollyFebruary 9, 2018 at 8:42 pm #79196Thank you very much! I will try this solution and I will let you know as soon as possible.
February 9, 2018 at 10:56 pm #79199@ Giovanni
First, thanks for your hard work to mod the bioses! 🙂
I have a question:
I think i have this version “BIOS V6 Date 12/05/2017 19:25:21 Ver 3BANS010 Jumper10x.P8.WP3132.NHNAUHL01”
But i´m not sure. in the first tab of the bios menu under “Project Version” it shows me this:
Jumper10x-P8-WP3132.N…
And under “Build Date and Time” it shows me:
12/05/2017 19:25:21
It looks very similar to your V6 Version, but where can i find this string: NHNAUHL01 i have only an N…
Here you can download my .rom backup.
Can you check it if it is similar tor your v6 unlocked version?
The key to download is:
!UUsHgDO5dIysQU5D-m9YyW3kc9azNnpVyxnI3X4nLq8
Thank you!
February 10, 2018 at 9:29 am #79201February 10, 2018 at 12:59 pm #79203@Giovannio
Cool, thank a lot! 🙂
I will flash your unlocked version tomorrow and report than!h
What do you prefer?
should I flash it over windows, or rather over uefi?
or is it basically the same?
Thank you!
February 10, 2018 at 1:02 pm #79204February 10, 2018 at 1:04 pm #79205@ Giovanni
Ok, i wanna give it a try!:)))
February 10, 2018 at 7:43 pm #79261February 10, 2018 at 7:45 pm #79264 -
AuthorPosts
- You must be logged in to reply to this topic.