Gray

Gray

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • November 24, 2016 at 9:44 am #57416
    Gray
    Participant
    • Posts: 15

    Sorry about mistake with nick 🙁
    I don’t know about calibration.
    Try to replace libraries at:
    /system/etc/firmware/
    /system/etc/atoisp/
    /system/vendor/firmware/
    /system/usr/idc
    /system/usr/icu

    All xml in /system/etc/
    And if it not work: /lib/hw/

    November 24, 2016 at 6:11 am #57404
    Gray
    Participant
    • Posts: 15
    brainvision wrote:

    that the touch works all the time.

    Hi @alessio
    Not really, sometimes it’s stuck without any known reason.
    I test this in different ROM’s, with some result.
    BR

    November 3, 2016 at 9:12 am #56332
    Gray
    Participant
    • Posts: 15

    Hi,
    I now see that you fully understand the topic.
    But then I’m not sure I understand your first question:

    Martin Gorbush wrote:

    Factory Android kernel use CV charging like 4.35V which is definetely to much for built-in battery.

    For 3.7V battery maximum CV charging voltage 4.35V is not “to much”, I would say a little, for your explanation of the some like +/- 4.45V….

    November 3, 2016 at 6:15 am #56328
    Gray
    Participant
    • Posts: 15

    Dear Martin,

    1. batteryuniversity.com, under management of the doctor (or already professor?) Buchmann , excellent knowledge source 🙂
    Let me give you an example of settings of the (dr. Buchmann) device Cadex:
    For 3.6V battery; Maximum charge voltage – 4.35V; standby voltage – 4.15V.

    Accordingly, for our batteries cell with 3.7V rates are even higher;-)

    2. Basic test I did at the stock ROM, and checked back on others.
    Changes in charge parameters have not noticed.

    Control of “Over Voltage Protection” (IMHO) depends more on the Power Manager IC.

    BR,
    Gray.

    November 2, 2016 at 8:27 am #56227
    Gray
    Participant
    • Posts: 15

    Hi, Martin.
    I did a series of tests (monitoring with BatteryWidget app), to test our battery.
    When you reach 100% of charge, voltage stabilized at about ~4.253V.
    It is normal for our kind of batteries.

    You are a little mistaken about the built-in battery.
    Depending on the specific technology, the battery can be: 3.6V; 3.7V; 3.8V.
    Accordingly, the maximum charge voltage is: ~4.1V; ~4.2V; ~4.3V.
    Our battery – 3.7V so ~ 4.2V maximum charge.
    BR
    Gray.

    October 17, 2016 at 4:16 pm #55064
    Gray
    Participant
    • Posts: 15

     

    Hi Eduardo,

    RemixOS fully working system.
    But as in any alternative ROM possible minor bugs.
    Installation is quite standard and simple:
    1. Download the zip file.
    2. Install it through TWRP recovery
    Good luck.

    October 16, 2016 at 9:37 am #54997
    Gray
    Participant
    • Posts: 15

    I’m not sure I understand the question …
    Could you rephrase the question?

    September 14, 2016 at 7:53 am #49716
    Gray
    Participant
    • Posts: 15
    Gabriele Savarese wrote:

    I understand, but is there a possibility to install it anyway?

    As one great man said:
    “If you want, it is not a fairy tale” 😉

    But I still not engaged in it.
    It is not trivial and requires a lot of time.

    September 14, 2016 at 5:50 am #49712
    Gray
    Participant
    • Posts: 15
    Gabriele Savarese wrote:

    the 3.0 version

    As I heard, there are still many bugs…

    September 13, 2016 at 9:19 am #49649
    Gray
    Participant
    • Posts: 15

    Hi Guys,

    If you going to use my RemixOS ROM, you are not loose Windows data.
    This ROM only format/change a Android system area.

    BR
    Gray.

    August 31, 2016 at 5:28 pm #48524
    Gray
    Participant
    • Posts: 15
    Fernando wrote:

    thanks for the rom

    You are welcome 🙂

    August 30, 2016 at 9:15 am #48447
    Gray
    Participant
    • Posts: 15
    Flubski wrote:

    worked for me.

    Perhaps I misled with another ROM that I rebuild
    You say this option works for Remix ROM? Good News!

    August 30, 2016 at 5:32 am #48433
    Gray
    Participant
    • Posts: 15
    Hans Sprungfeld wrote:

    what do you mean?

    i mean:
    1. tablet make restart after flashing UpdateSU
    2. show a boot animation
    3. show a boot animation
    4. show a boot animation
    5. …..
    BootLoop…

    Hans Sprungfeld wrote:

    Why?

    God knows…
    I do not have appropriated knowledge 🙁

    August 30, 2016 at 4:48 am #48430
    Gray
    Participant
    • Posts: 15
    Flubski wrote:

    SuperSU

    Flubski – thank, but i afraid this way not give a result.
    Right now i don’t have a worked solution, just leave the old SU.

    fjen wrote:

    Isn’t it easier/possible to just flash the supersu.zip through recovery?

    It will put a tablet in boot loop mode 🙁

    fjen wrote:

    Does the Camera work for example?

    Yep – camera, accelerometer, wi-fi, bluetooh etc – all work (at least for me) 😉

    August 29, 2016 at 7:26 am #48347
    Gray
    Participant
    • Posts: 15

    Hi guys,

    It was interesting to read your thread .

    A couple of months ago, I found a RemixOS v2 ROM for the model Chuwi HiBook (created by mr. kostyamat from Russian 4pda forum. It’s something like a Russian version of XDA forum): http://4pda.ru/forum/index.php?showtopic=734255&st=360#entry50072404

    I’m adapt it for our iwork10 Ultimate (TD version) tablet.

    If you want, you can try it “as is”: https://drive.google.com/file/d/0B2OcauV-M6rRRVJRM1o0dzV3SDg/view?usp=sharing
    Installed through recovery and not kill Windows 🙂

    BR.

    P.S. Sorry about my not so perfect English 😉

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)

Lost Password

Skip to toolbar