[Ferguson]

I had 2 units, but i’m trying to return one of them. I’m glad you have no issue with you tablet. Warranty? I’m not very confident about this…

Finding this issue in an article about the tablet it’s very significant… perhaps it’s a common issue.

Where did you buy your tablet? Aliexpress?

Did you modify graphics bios settings? It’s weird, because on bios screen or boot menu i have no issue, it is showing after loading android or windows.

[Ferguson]

I found android v1.03 with better battery consumption than v1.06. In my case, BIOS update have not caused battery drain…

[Ferguson]

For the moment it’s working (after update BIOS from Device Manager under Windows).

[Ferguson]

Finally, perhasp I found a solution. For me it has been working for the last 24 hours.

Try to update bios from windows.

<b>Explorador de Windows -> Botón derecho del ratón encima de “este equipo” -> Propiedades -> Configuracion Avanzada del Sistema -> Hardware -> Administrador de dispositivos -> Firmware </b>

(settings -> devices admin -> firmware -> system firmware -> update -right mouse button)

(link in spanish)

https://www.htcmania.com/showthread.php?t=1187712

<b>UPDATE DE BIOS</b>

<b>1.-</b> Arrancamos la tablet en modo windows

<b>Explorador de Windows -> Botón derecho del ratón encima de “este equipo” -> Propiedades -> Configuracion Avanzada del Sistema -> Hardware -> Administrador de dispositivos -> Firmware </b>

Dentro de Firmware si lo desplegamos encontramos dos opciones

Firmware del dispositivo
Firmware del Sistema

<b>2.-</b> Con el botón derecho del ratón encima del Firmware del Sistema pulsamos “Actualizar software del conrtolador” -> Buscar Automáticamente software de controlador actualizado.
Esperamos a que lo encuentre y al finalizar nos habrá actualizado la bios a la versión 3.05 que no quita la opción de la SD en windows

[Ferguson]

Sorry, 64GB sdcard with fat32.

[Ferguson]

Did you check this?

My solution to a stable SD card

I have no luck with bios settings… I’m testing with 32 GB sdcard fat32.

[Ferguson]

Screen is very disappointed, too. I tested 2 tablets, both of them with same issue, a shadow around the screen, near the edges. And, of course, screen bleedings…

[Ferguson]

In windows I use intel drivers (i update to windows 10 creators, default windows drivers)

[Ferguson]

I read in some forums that this problem is a bios issue, not windows issue. It’s common in other tablets (chuwi, etc.)

https://forum.chuwi.com/thread-3250-1-1.html

Currently, I’m testing a bios setting (go to bios, Chipset- southbridge – SCC SDIO Support-> disabled; default setting: ACPI Mode).

For the momment, it is working for me (android & windows). But, be very very carefull touching bios settings.

Other forums recommend SCC SDIO Support and SCC SD Card Support settings in PCI Mode (default: ACPI Mode), but in my case, windows was fine without issues, but android was not working well (random restarts)

[Ferguson]

If you want to boot an android USB device, you must enter android OS first. The same applies to windows USB device (you must enter windows OS first).

I recommend you don’t touch bios settings.

[Ferguson]

Hi, I tried both of them (v1.03 english, v.06 chinese).

I prefer v1.03 english because it has better stand-by consumption. By other hand, it was difficult obtain write permission with sdcard NTFS format,

[Author]

Posts