[angelo]

#foras

V6 was my first try .. so i don’t know

[angelo]

Step by step installing guide to for teclast x98pro mirek v6 rom

As i got crazy trying to install Mireks v6 rom i’d like to share my experience putting it down step by step, hoping this  is going to be helpful for someone else

This way worked for me with Window7

1st step. download the rom  package from here: “X98_PRO_android_5.1_mirek190_v6.0”    https://drive.google.com/uc?id=0B4EXB7Ngka9pcVJzMzZvOUI0eVk&export=download

2nd step. As administrator in win7 Unpack the compressed package and
“1run FIRST_ INSTALL_ IT_! (ADB_drivers).exe”

3rd step. Download drivers from intel website here: https://software.intel.com/en-us/android/tools
And here there are instructions: https://software.intel.com/en-us/android/articles/installation-instructions-for-intel-android-usb-driver

So always as administator install: “IntelAndroidDrvSetup1.10.0”

4th step. Pick the tablet (fully charged), turn it on in android and go to:  Set up > system > developer option (or some name similar) turn on “usb debugging mode”and switch the tablet off.

5th step.  Run the tablet in DnX mode – switch on the tablet pressing [ power, vol+, vol-] at the same time until you will see a tiny DnX label.

6th step. Plug the usb cable into the computer on one side and the micro usb into the tablet.

7th step. Always as administrator in win7 run: “FLASHER_v3.0-(-just_press_twice-)” that you find inside mirek packagethat you downloaded first.

8th  step. On the screen you choose option number 2 in order to have a clean install keeping also window partition untouched.

If you have problem with driver’s signature you can at the very beginning run cmd as admin and

execute this to disable driver signatur and reboot as  admin:

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
shutdown /r /t 0

After finishing remember to re enable it with cmd (always as admin)
To ENABLE “Driver Signing” (so you CAN’T install UNSIGNED Drivers) execute this :

bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING OFF
shutdown /r /t 0

I hope this is all correct some experts please check this list and make changes if necessary.
By the way mirek is sooo much better than the original!
thanks Mirek

ps

please excuse my english

[angelo]

@ruto inor

You made my day!

many many many thanks!!!

That was the problem using signed driver no problem at all

I have to say also that I put the table in usb dubugging mode at point 4 , I ‘ll probably rewrite comoletely in a row in order to help someone else

Thanks again!

[angelo]

I didn’t upgrade  yet

I just went to the link yuo posted and after inserting the product Id  …. and  i got this…

“找不到此ID号的相关下载！

请手动选择以下下载地址：

平板固件程序下载      “

Which i don’t know the meaning…

[angelo]

3 –  Always as admin  Run “2-SECOND INSTALL_IT_! (Intel_ADB_drivers).exe”  Always from  package  “X98_PRO_android_5.1_mirek190_v6.0”

4 – Pick the tablet turn it it on as Android and switch it off

5 – Run on  the tablet in DnX mode – switch on the tablet pressing [ power, vol+, vol-] at the same time until you will see DnX label (its written in very small letters)

6 – Plug the usb cable to the computer from une side  (better normally to the rear ones and not in a Hub) and the micro usb to the other.

7 Run “FLASHER_v3.0-(-just_press_twice-)”   you canget it   always from “X98_PRO_android_5.1_mirek190_v6.0”

8 Choose option nr2 for cleanAndroid install preserving also the windows partiotion untouched

9 at  this point in my pc come out “waiting for device”

What do i do wrong?

thanks

[angelo]

1 – First thing i do I run Cmd as Admin and disable driver signatur and reboot as  admin:

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
shutdown /r /t 0

2 – From  package  “X98_PRO_android_5.1_mirek190_v6.0” I run “1-FIRST_ INSTALL_ IT_! (ADB_drivers).exe”

 

Attachments:

You must be logged in to view attached files.

[angelo]

Of course i did log in as administrator , and i’m entering from boot in android menu in android then i tried either to turn it off and turn in on again and i tried to reboot once i got in in android , still my only result is “waiting for device”

Thanks for your answer anyway.

I see there is an unkonwn device in device manager , i tried to install driver from there but it is telling me that i’ve got the right drivers but they have been disactivated becouse they are no signed.

[angelo]

I guysanyone could help me

I’m trying to install mirek v6 from a win7 64

I’m stuck at the the “waiting on device” point

When i install Adb driver it is not unning smooyhly This is what i see

Output folder: C:\Program Files (x86)\Intel Android Device USB driver
Windows version: 7
Extract: Setup.ico… 100%
Extract: CertMgr.exe… 100%
Extract: MFLD_USB_driver_cert.cer… 100%
CertMgr.exe MFLD_USB_driver_cert.cer returned 0
Extract: drvinstall.exe… 100%
Extract: DIFxAPI.dll… 100%
Extract: intc_usbcomp.inf… 100%
Extract: intc_cdcserial.inf… 100%
Extract: intc_mtp.inf… 100%
Extract: intc_rndis.inf… 100%
Extract: intc_adb.inf… 100%
Extract: intc_dvctrace.inf… 100%
Extract: intc_usbcompamd64.cat… 100%
Extract: intc_cdcserialamd64.cat… 100%
Extract: intc_mtpamd64.cat… 100%
Extract: intc_rndisamd64.cat… 100%
Extract: intc_adbamd64.cat… 100%
Extract: intc_dvctraceamd64.cat… 100%
Output folder: C:\Program Files (x86)\Intel Android Device USB driver\amd64
Extract: WdfCoInstaller01009.dll… 100%
Extract: winusbcoinstaller2.dll… 100%
Extract: WUDFUpdate_01009.dll… 100%
Output folder: C:\Program Files (x86)\Intel Android Device USB driver
Installing drivers, please wait
drvinstall.exe intc_usbcomp.inf returned 0
drvinstall.exe intc_cdcserial.inf returned 0
drvinstall.exe intc_rndis.inf returned 0
drvinstall.exe intc_mtp.inf returned 0
drvinstall.exe intc_adb.inf returned 0

drvinstall.exe intc dvctrace.inf returned  0

 

the last 6 lines don’t look so good

I’ve tried many workaround to make my pc accept the drivers

Test mode , disbled driver signature , disbled Uac, firewall

nothing : waiting for devices is my only result Please Help

[angelo]

Hi, I’m sorry but i am a newbie at modding. Is there a step by step howto?

To do the latest version of the mod it is suggested to do a clean install…should i first wipe out the android partition?

First thing to do is intall driver . Mooms suggested https://software.intel.com/android/articles/intel-usb-driver-for-android-devices

Are these drivers the best option?

Thanks and sorry if those questions sound silly to you most

 

 

[Author]

Posts